3D modelling of the flow of self-compacting concrete with or without steel fibres. Part I: slump flow test

被引：36
|
作者：
Deeb, R. [1 ]
Kulasegaram, S. [1 ]
Karihaloo, B. L. [1 ]
机构：
[1] Cardiff Univ, Sch Engn, Cardiff CF24 3AA, S Glam, Wales
来源：
COMPUTATIONAL PARTICLE MECHANICS | 2014年 / 1卷 / 04期
关键词：
3D simulation; Self-compacting concrete; Non-Newtonian viscous flow; Smooth particle hydrodynamic (SPH); Short steel fibres;
D O I：
10.1007/s40571-014-0002-y
中图分类号：
O1 [数学];
学科分类号：
0701 ; 070101 ;
摘要：
In part I of this two-part paper, a three-dimensional Lagrangian smooth particle hydrodynamics method has been used to model the flow of self-compacting concrete (SCC) with or without short steel fibres in the slump cone test. The constitutive behaviour of this non-Newtonian viscous fluid is described by a Bingham-type model. The 3D simulation of SCC without fibres is focused on the distribution of large aggregates (larger than or equal to 8 mm) during the flow. The simulation of self-compacting high-and ultra-high-performance concrete containing short steel fibres is focused on the distribution of fibres and their orientation during the flow. The simulation results show that the fibres and/or heavier aggregates do not precipitate but remain homogeneously distributed in the mix throughout the flow.
引用
收藏
页码：373 / 389
页数：17
相关论文
共 50 条
  • [1] 3D modelling of the flow of self-compacting concrete with or without steel fibres. Part I: slump flow test
    R. Deeb
    S. Kulasegaram
    B. L. Karihaloo
    Computational Particle Mechanics, 2014, 1 : 373 - 389
  • [2] 3D MODELLING OF THE FLOW OF SELF-COMPACTING CONCRETE WITH OR WITHOUT STEEL FIBRES
    Deeb, R.
    Kulasegaram, S.
    Karihaloo, B. L.
    DESIGN, PERFORMANCE AND USE OF SELF-CONSOLIDATING CONCRETE (SCC 2014), 2014, 93 : 31 - 31
  • [3] 3D modelling of the flow of self-compacting concrete with or without steel fibres. Part II: L-box test and the assessment of fibre reorientation during the flow
    Deeb, R.
    Kulasegaram, S.
    Karihaloo, B. L.
    COMPUTATIONAL PARTICLE MECHANICS, 2014, 1 (04) : 391 - 408
  • [4] 3D modelling of the flow of self-compacting concrete with or without steel fibres. Part II: L-box test and the assessment of fibre reorientation during the flow
    R. Deeb
    S. Kulasegaram
    B. L. Karihaloo
    Computational Particle Mechanics, 2014, 1 : 391 - 408
  • [5] Modelling the flow of self-compacting concrete
    Kulasegaram, S.
    Karihaloo, B. L.
    Ghanbari, A.
    INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS, 2011, 35 (06) : 713 - 723
  • [6] Effect of steel fibers on self-compacting concrete slump flow and compressive strength
    Majain, N.
    Rahman, A. B. A.
    Mohamed, R. N.
    Adnan, A.
    10TH ASIA PACIFIC STRUCTURAL ENGINEERING AND CONSTRUCTION CONFERENCE 2018, 2019, 513
  • [7] A simple test method to assess slump flow and stability of self-compacting concrete
    Bouziani, Tayeb
    COMPUTERS AND CONCRETE, 2018, 21 (02): : 111 - 116
  • [8] Bayesian networks modelling for predicting compressive strength and slump flow of self-compacting concrete
    Abdi K.
    Kebaili N.
    Djouhri M.
    Asian Journal of Civil Engineering, 2024, 25 (3) : 2567 - 2578
  • [9] DETERMINATION OF THE RHEOLOGICAL PARAMETERS OF SELF-COMPACTING CONCRETE MATRIX USING SLUMP FLOW TEST
    Neophytou, Marina K-A.
    Pourgouri, Stella
    Kanellopoulos, Antonios D.
    Petrou, Michael F.
    Ioannou, Ioannis
    Georgiou, Georgios
    Alexandrou, Andreas
    APPLIED RHEOLOGY, 2010, 20 (06) : 62402
  • [10] Estimation of Rheological Properties of Self-Compacting Concrete using Slump and Slump Flow Tests
    Attanayaka, D. P.
    Herath, K. R. B.
    PROCEEDINGS OF THE 2017 6TH NATIONAL CONFERENCE ON TECHNOLOGY & MANAGEMENT (NCTM) - EXCEL IN RESEARCH AND BUILD THE NATION, 2017, : 46 - 50
12345