Hydrodynamic effect of non-closed elliptical grooves of bi-directional rotation gas face seals

Purpose The purpose of this paper is to improve opening performance of bi-directional rotation gas face seals by investigating the hydrodynamic effect of non-closed elliptical grooves. Design/methodology/approach A model of non-closed elliptical groove bi-directional rotation gas face seal is developed. The distribution of lubricating film pressure is obtained by solving gas Reynolds equations with the finite difference method. The program iterates repeatedly until the convergence criterion on the opening force is satisfied, and the sealing performance is finally obtained. Findings Non-closed elliptical groove presents much stronger hydrodynamic effect than the closed groove because of drop of the gas resistance flowing into grooves. Besides, the non-closed elliptical groove presents significant hydrodynamic effect under bi-directional rotation conditions, and an increase of over 40 per cent is obtained for the opening force at seal pressure 4.5 MPa, as same level as the unidirectional spiral groove gas seal. In the case of bi-directional rotation, the value of the inclination angle is recommended to set as 90 degrees presenting a structure symmetry so as to keep best opening performance for both positive and reverse rotation. Originality/value A model of non-closed elliptical groove bi-directional rotation gas face seal is established. The hydrodynamic mechanism of this gas seal is illustrated. Parametric investigation of inclination angle and integrity rate is presented for the non-closed elliptical groove bi-directional rotation gas face seal.