Preparation of LiNi0.5Mn1.5O4 as 5 V Cathode Materials for Lithium Ion Battery and Diffusion Performance of Li+ in the Materials

被引：0

作者：

Lu Hua-Quan ^{[1
]}

Wu Feng ^{[1
]}

Su Yue-Feng ^{[1
]}

Li Ning ^{[1
]}

Chen Shi ^{[1
]}

Bao Li-Ying ^{[1
]}

机构：

[1] Beijing Inst Technol, Sch Chem Engn & Environm, Natl Dev Ctr Hitech Green Mat, Beijing 100081, Peoples R China

来源：

CHEMICAL JOURNAL OF CHINESE UNIVERSITIES-CHINESE | 2011年 / 32卷 / 04期

关键词：

Lithium-ion battery; Cathode material; Oxalate co-precipitation; LiNi0.5Mn1.5O4; Diffusion coefficient; NANO-CRYSTALLINE LINI0.5MN1.5O4; ELECTROCHEMICAL PERFORMANCE; COPRECIPITATION METHOD; COEFFICIENT; LIFEPO4;

D O I：

暂无

中图分类号：

O6 [化学];

学科分类号：

0703 ;

摘要：

5 V cathode material LiNi0.5M1.5O4 was synthesized via an oxalate co-precipitation method, and the relationship between the structure, morphology and the electrochemical performance of the material was investigated. The results show that the sample synthesized at 900 degrees C has the best electrochemical performance. Its initial discharge capacity reaches 133.0 mA.h/g, and after cycled for 30 times, still maintains at 132.2 mA.h/g (capacity retention 99. 4%). The chemical diffusion coefficient of Li+ ion in LiNi0.5M1.5O4 cathode material was measured by potentiostatic intermittent titration technique (PITT) and electrochemical impedance spectroscopy(EIS). The chemical diffusion coefficient of Li+ ion ranges in 10(-10)-10(-11) cm(2)/s.

引用

页码：946 / 951

页数：6

共 18 条

[1] Effects of precursor treatment with reductant or oxidant on the structure and electrochemical properties of LiNi0.5Mn1.5O4
Chang, Zhaorong
Dai, Dongmei
Tang, Hongwei
Yu, Xu
Yuan, Xiao-Zi
Wang, Haijiang
[J]. ELECTROCHIMICA ACTA, 2010, 55 (19) : 5506 - 5510
[2] Study of LiNi0.5Mn1.5O4 synthesized via a chloride-ammonia co-precipitation method: Electrochemical performance, diffusion coefficient and capacity loss mechanism
Fang, X.
Ding, N.
Feng, X. Y.
Lu, Y.
Chen, C. H.
[J]. ELECTROCHIMICA ACTA, 2009, 54 (28) : 7471 - 7475
[3] Hu F, 2009, CHEM J CHINESE U, V30, P1492
[4] Crystal structure and cathode performance dependence on oxygen content of LiMn1.5Ni0.5O4 as a cathode material for secondary lithium batteries
Idemoto, Y
Narai, H
Koura, N
[J]. JOURNAL OF POWER SOURCES, 2003, 119 : 125 - 129
[5] Electrochemical characteristics of LiNi0.5Mn1.5O4 cathodes with Ti or Al current collectors
Kanamura, K
Hoshikawa, W
Umegaki, T
[J]. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2002, 149 (03) : A339 - A345
[6] The effect of particle size and morphology on the rate capability of 4.7 VLiMn1.5+δNi0.5-δO4 spinel lithium-ion battery cathodes
Kunduraci, M.
Amatucci, G. G.
[J]. ELECTROCHIMICA ACTA, 2008, 53 (12) : 4193 - 4199
[7] Preparation and characterization of nano-crystalline LiNi0.5Mn1.5O4 for 5 V cathode material by composite carbonate process
Lee, YS
Sun, YK
Ota, S
Miyashita, T
Yoshi, M
[J]. ELECTROCHEMISTRY COMMUNICATIONS, 2002, 4 (12) : 989 - 994
[8] Liu GQ, 2005, ELECTROCHIM ACTA, V50, P1965, DOI 10.1016/j.electacta.2004.08.047
[9] Lithium insertion material of LiNi1/2Mn1/2O2 for advanced lithium-ion batteries
Makimura, Y
Ohzuku, T
[J]. JOURNAL OF POWER SOURCES, 2003, 119 : 156 - 160
[10] Nano-crystalline LiNi0.5Mn1.5O4 synthesized by emulsion drying method
Myung, ST
Komaba, S
Kumagai, N
Yashiro, H
Chung, HT
Cho, TH
[J]. ELECTROCHIMICA ACTA, 2002, 47 (15) : 2543 - 2549

← 1 2 →