Comparison of Contributions of the Mechanisms of the Superplastic Deformation of Binary and Multicomponent Brasses

被引：2

作者：

Yakovtseva, O. A. ^{[1
]}

Mikhaylovskaya, A. V. ^{[1
]}

Irzhak, A. V. ^{[2
]}

Kotov, A. D. ^{[1
]}

Medvedeva, S. V. ^{[1
]}

机构：

[1] Natl Univ Sci & Technol MISiS, Moscow 119049, Russia

[2] Russian Acad Sci, Inst Problems Microelect Technol, Chernogolovka 142432, Moscow Oblast, Russia

来源：

PHYSICS OF METALS AND METALLOGRAPHY | 2020年 / 121卷 / 06期

关键词：

index of superplasticity; grain boundary sliding; brass; diffusion; DIFFUSION CREEP; BEHAVIOR; FRACTURE; GROWTH;

D O I：

10.1134/S0031918X20060186

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The microstructural changes on the surface of the samples of a binary brass and of brasses alloyed with iron and manganese or aluminum, taken place in the process of superplastic deformation at 550 degrees C at a constant strain rate of 1 x 10(-3)s(-1)have been analyzed in this work. The contributions of the intergranular and intragranular deformation to the total elongation have been determined. It has been shown that the additional alloying of brass leads to a decrease in the contribution of the grain boundary sliding, which is decreased from 54% in the binary brass to 17-23% in the alloyed brasses, and to an increase in the contribution of the intragranular deformation from 10 to 30%. Experiments based on the Kirkendall method have shown that alloying leads to a slowdown of the diffusion processes, which can presumably limit the grain boundary sliding in the investigated multicomponent brasses.

引用

页码：582 / 589

页数：8

共 50 条

[1] Comparison of Contributions of the Mechanisms of the Superplastic Deformation of Binary and Multicomponent Brasses
O. A. Yakovtseva
A. V. Mikhaylovskaya
A. V. Irzhak
A. D. Kotov
S. V. Medvedeva
Physics of Metals and Metallography, 2020, 121 : 582 - 589
[2] Superplastic deformation of α plus β brasses
Dutkiewicz, J
Malczewski, P
Kusnierz, J
ADVANCES IN MECHANICAL BEHAVIOUR, PLASTICITY AND DAMAGE, VOLS 1 AND 2, PROCEEDINGS, 2000, : 1383 - 1388
[3] Superplastic deformation behaviour of aluminium containing brasses
Yakovtseva, O. A.
Mikhaylovskaya, A. V.
Pozdniakov, A. V.
Kotov, A. D.
Portnoy, V. K.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 674 : 135 - 143
[4] Microstructure and orientation changes during superplastic deformation of α+β CuZnSi brasses
Dutkiewicz, J
Szpunar, J
Kim, B
Nciri, R
Malczewksi, P
Kusnierz, J
PRICM 4: FORTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, VOLS I AND II, 2001, : 2085 - 2088
[5] Microstructural Contributions of Different Polyolefins to the Deformation Mechanisms of Their Binary Blends
Van Belle, Astrid
Demets, Ruben
Mys, Nicolas
Van Kets, Karen
Dewulf, Jo
Van Geem, Kevin
De Meester, Steven
Ragaert, Kim
POLYMERS, 2020, 12 (05)
[6] Effect of Ni on the Contributions of Superplastic Deformation Mechanisms in an Al–Zn–Mg–Cr Alloy
O. A. Yakovtseva
M. N. Postnikova
A. V. Irzhak
O. V. Rofman
A. V. Mikhaylovskaya
Physics of Metals and Metallography, 2023, 124 : 944 - 954
[7] Superplastic deformation mechanisms of monolithic intermetallics
Kim, WY
Sato, Y
Semboshi, S
Hanada, S
Kokawa, H
TOWARDS INNOVATION IN SUPERPLASTICITY II, 1999, 304-3 : 147 - 154
[8] Numerical modeling of superplastic deformation mechanisms
Chandra, N
Dang, P
SUPERPLASTICITY IN ADVANCED MATERIALS - ICSAM-97, 1997, 243-2 : 53 - 58
[9] Effect of Ni on the Contributions of Superplastic Deformation Mechanisms in an Al-Zn-Mg-Cr Alloy
Yakovtseva, O. A.
Postnikova, M. N.
Irzhak, A. V.
Rofman, O. V.
Mikhaylovskaya, A. V.
PHYSICS OF METALS AND METALLOGRAPHY, 2023, 124 (09): : 944 - 954
[10] ENERGY ACCUMULATED BY COLD PLASTIC-DEFORMATION OF BINARY AND RELATED BRASSES
GROZA, I
MARCHIDAN, DI
REVUE ROUMAINE DE CHIMIE, 1976, 21 (04) : 509 - &

← 1 2 3 4 5 →