The development of multi-objective optimization model for excess bagasse utilization: A case study for Thailand

被引:20
|
作者
Buddadee, Bancha [1 ]
Wirojanagud, Wanpen [2 ]
Watts, Daniel J. [3 ]
Pitakaso, Rapeepan [4 ]
机构
[1] Chulalongkorn Univ, Natl Ctr Excellence Environm & Hazardous Waste Ma, Bangkok 10330, Thailand
[2] Khon Kaen Univ, Fac Engn, Dept Environm Engn, Res Ctr Environm & Hazardous Subst Management, Khon Kaen 40002, Thailand
[3] New Jersey Inst Technol, Ctr Environm Engn & Sci, Newark, NJ 07102 USA
[4] Ubonratchathani Univ, Fac Engn, Dept Ind Engn, Ubon Ratchathani 34190, Thailand
关键词
bagasse; LCIA; multi-objective optimization; ethanol; GWP;
D O I
10.1016/j.eiar.2007.08.005
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
In this paper, a multi-objective optimization model is proposed as a tool to assist in deciding for the proper utilization scheme of excess bagasse produced in sugarcane industry. Two major scenarios for excess bagasse utilization are considered in the optimization. The first scenario is the typical situation when excess bagasse is used for the onsite electricity production. In case of the second scenario, excess bagasse is processed for the offsite ethanol production. Then the ethanol is blended with an octane rating of 91 gasoline by a portion of 10% and 90% by volume respectively and the mixture is used as alternative fuel for gasoline vehicles in Thailand. The model proposed in this paper called "Environmental System Optimization" comprises the life cycle impact assessment of global warming potential (GWP) and the associated cost followed by the multi-objective optimization which facilitates in finding out the optimal proportion of the excess bagasse processed in each scenario. Basic mathematical expressions for indicating the GWP and cost of the entire process of excess bagasse utilization are taken into account in the model formulation and optimization. The outcome of this study is the methodology developed for decision-making concerning the excess bagasse utilization available in Thailand in view of the GWP and economic effects. A demonstration example is presented to illustrate the advantage of the methodology which may be used by the policy maker. The methodology developed is successfully performed to satisfy both environmental and economic objectives over the whole life cycle of the system. It is shown in the demonstration example that the first scenario results in positive GWP while the second scenario results in negative GWP. The combination of these two scenario results in positive or negative GWP depending on the preference of the weighting given to each objective. The results on economics of all scenarios show the satisfied outcomes. (c) 2007 Elsevier Inc. All rights reserved.
引用
收藏
页码:380 / 391
页数:12
相关论文
共 50 条
  • [1] Multi-objective optimization of sugarcane bagasse utilization in an Indian sugar mill
    Varshney, Deepankar
    Mandade, Prasad
    Shastri, Yogendra
    SUSTAINABLE PRODUCTION AND CONSUMPTION, 2019, 18 : 96 - 114
  • [2] A Multi-Objective Optimization Model for Solid Waste Disposal Under Uncertainty: A Case Study of Bangkok, Thailand
    Laokhongthavorn, Laemthong
    U-tapao, Chalida
    INTERNATIONAL JOURNAL OF CIVIL ENGINEERING, 2017, 15 (2A) : 205 - 212
  • [3] Multi-objective optimization of sugarcane bagasse pretreatment
    Kamzon, Mohamed Anouar
    Abderafi, Souad
    Bounahmidi, Tijani
    BIOMASS CONVERSION AND BIOREFINERY, 2023, 14 (24) : 32005 - 32018
  • [4] A Multi-Objective Optimization Model for Solid Waste Disposal Under Uncertainty: A Case Study of Bangkok, Thailand
    Laemthong Laokhongthavorn
    Chalida U-tapao
    International Journal of Civil Engineering, 2017, 15 : 205 - 212
  • [5] Multi-objective optimization in distillation unit: a case study
    Ramzan, Naveed
    Witt, Werner
    CANADIAN JOURNAL OF CHEMICAL ENGINEERING, 2006, 84 (05): : 604 - 613
  • [6] Multi-objective simulation optimization:: A case study in healthcare management
    Baesler, Felipe F.
    Sepulveda, Jose A.
    INTERNATIONAL JOURNAL OF INDUSTRIAL ENGINEERING-THEORY APPLICATIONS AND PRACTICE, 2006, 13 (02): : 156 - 165
  • [7] Multi-objective Bayesian optimization: a case study in material extrusion
    Myung, Jay I.
    Deneault, James R.
    Chang, Jorge
    Kang, Inhan
    Maruyama, Benji
    Pitt, Mark A.
    DIGITAL DISCOVERY, 2025, 4 (02): : 464 - 476
  • [8] Application of Multi-objective Optimization on Ergonomics in Production - A Case Study
    Pascual, Aitor Iriondo
    Hogberg, Dan
    Syberfeldt, Anna
    Brolin, Erik
    Hanson, Lars
    ADVANCES IN ADDITIVE MANUFACTURING, MODELING SYSTEMS AND 3D PROTOTYPING, 2020, 975 : 584 - 594
  • [9] Fuzzy optimization with multi-objective evolutionary algorithms: a case study
    Sanchez, G.
    Jimenez, F.
    Vasant, P.
    2007 IEEE SYMPOSIUM ON COMPUTATIONAL INTELLIGENCE IN MULTI-CRITERIA DECISION MAKING, 2007, : 58 - +
  • [10] Multi-objective supply chain optimization: An industrial case study
    Amodeo, Lionel
    Chen, Haoxun
    El Hadji, Aboubacar
    APPLICATIONS OF EVOLUTIONARY COMPUTING, PROCEEDINGS, 2007, 4448 : 732 - +