Design, Construction, and Installation of Movable Electrode Biasing System on Tokamak

被引:13
|
作者
Ghoranneviss, Mahmood [2 ]
Elahi, Ahmad Salar [1 ]
Tajdidzadeh, Mojgan [2 ]
Mohammadi, Siamak [2 ]
Arvin, Reza [3 ]
Gheydi, Mahgam [2 ]
Fard, Ali Abbaspour Tehrani [4 ]
机构
[1] Islamic Azad Univ, Saveh Branch, Fac Engn, Dept Phys, Saveh, Iran
[2] Islamic Azad Univ, Sci & Res Branch, Plasma Phys Res Ctr, Tehran, Iran
[3] Islamic Azad Univ, Cent Tehran Branch, Fac Sci, Tehran, Iran
[4] Sharif Univ Technol, Dept Elect Engn, Tehran, Iran
关键词
Tokamak; Electrode biasing system; Plasma parameters; PROFILE CHANGES; PLASMA; EDGE; CONFINEMENT; CURRENTS; TEXTOR;
D O I
10.1007/s10894-010-9307-x
中图分类号
TL [原子能技术]; O571 [原子核物理学];
学科分类号
0827 ; 082701 ;
摘要
The first results of the movable electrode biasing experiments performed on the IR-T1 tokamak are presented. For this purpose, a movable electrode biasing system was designed, constructed, and installed on the IR-T1 tokamak, and then the positive voltage applied to an electrode inserted inside the tokamak limiter and the plasma current, poloidal and radial components of the magnetic fields, loop voltage, and diamagnetic flux in the absence and presence of the biased electrode were measured. Results compared and discussed.
引用
收藏
页码:467 / 470
页数:4
相关论文
共 50 条
  • [1] RETRACTION: Design, Construction, and Installation of Movable Electrode Biasing System on Tokamak
    Ghoranneviss, Mahmood
    Elahi, Ahmad Salar
    Tajdidzadeh, Mojgan
    Mohammadi, Siamak
    Arvin, Reza
    Gheydi, Mahgam
    Fard, Ali Abbaspour Tehrani
    JOURNAL OF FUSION ENERGY, 2024, 43 (02)
  • [2] Design and Manufacturing of the Electrode Biasing System for the Tokamak
    Elahi, Ahmad Salar
    Ghoranneviss, Mahmood
    Mohammadi, Siamak
    Arvin, Reza
    IEEE TRANSACTIONS ON PLASMA SCIENCE, 2012, 40 (03) : 892 - 897
  • [3] Design and construction of hot limiter biasing system for the tokamak
    Elahi, Ahmad Salar
    Ghoranneviss, Mahmood
    Arvin, Reza
    Mohammadi, Siamak
    RADIATION EFFECTS AND DEFECTS IN SOLIDS, 2013, 168 (09): : 642 - 653
  • [4] The construction of an electrode biasing system for driving plasma rotation in J-TEXT tokamak
    Zhu, T. Z.
    Chen, Z. P.
    Sun, Yue
    Nan, J. Y.
    Liu, H.
    Zhuang, G.
    Wang, Z. J.
    REVIEW OF SCIENTIFIC INSTRUMENTS, 2014, 85 (05):
  • [5] Efficiency of plasma biasing by movable localized limiter in tokamak ISTTOK
    Nedzelskiy, IS
    Silva, C
    Figueiredo, H
    Varandas, CFA
    Cabral, JAC
    Galvao, RMO
    CZECHOSLOVAK JOURNAL OF PHYSICS, 2005, 55 (03) : 361 - 366
  • [6] Design and construction of a movable in-vessel power electrode on RFX
    Desideri, D
    Antoni, V
    Bagatin, M
    Baker, W
    De Lorenzi, A
    Maschio, A
    Monari, M
    Zaccaria, P
    17TH IEEE/NPSS SYMPOSIUM ON FUSION ENGINEERING, VOLS 1 AND 2, 1998, : 568 - 571
  • [7] Electron emissive electrode for the plasma biasing experiment on tokamak ISTTOK
    Figueiredo, H
    Nedzelskiy, IS
    Silva, C
    Varandas, CAF
    Cabral, JAC
    Galvao, RMO
    REVIEW OF SCIENTIFIC INSTRUMENTS, 2004, 75 (10): : 4240 - 4242
  • [8] Design and construction of Alborz tokamak vacuum vessel system
    Mardani, M.
    Amrollahi, R.
    Koohestani, S.
    FUSION ENGINEERING AND DESIGN, 2012, 87 (09) : 1616 - 1620
  • [9] The influence of electrode biasing on plasma confinement in the J-TEXT tokamak
    Sun, Yue
    Chen, Z. P.
    Zhu, T. Z.
    Yu, Q.
    Zhuang, G.
    Nan, J. Y.
    Ke, X.
    Liu, H.
    PLASMA PHYSICS AND CONTROLLED FUSION, 2014, 56 (01)
  • [10] Improved confinement events triggered by emissive electrode biasing on the tokamak ISTTOK
    Silva, C
    Nedzelskiy, I
    Figueiredo, H
    Galvao, RMO
    Cabral, JAC
    Varandas, CAF
    NUCLEAR FUSION, 2004, 44 (07) : 799 - 810