Thermodynamic Miscibility and Thermal and Mechanical Properties of Poly(ethylene-co-vinyl acetate-co-carbon monoxide)/Poly(vinyl chloride) Blends

被引：19

作者：

Selvakumar, M. ^{[1
,2
]}

Mahendran, Arunjunairaj ^{[3
]}

Bhagabati, Purabi ^{[2
]}

Anandhan, S. ^{[1
]}

机构：

[1] Natl Inst Technol, Dept Met & Mat Engn, Mangalore 575025, India

[2] Indian Inst Technol, Ctr Rubber Technol, Kharagpur 721302, W Bengal, India

[3] Kompetenzzentrum Holz GmbH, W3C, A-9300 St Veit Glan, Austria

来源：

ADVANCES IN POLYMER TECHNOLOGY | 2015年 / 34卷 / 01期

关键词：

Blends; Crystallization; Differential scanning calorimetry; Miscibility; Poly(vinyl chloride); POLYMER ELECTROLYTES; ACRYLATE RUBBER; PVC/EVA BLENDS; BEHAVIOR; CRYSTALLIZATION; COMPATIBILITY; POLYETHYLENE; MORPHOLOGY; FILMS; MICROSTRUCTURE;

D O I：

10.1002/adv.21467

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

This paper reports the miscibility and thermal and mechanical properties of solution cast binary blends of poly(ethylene-co-vinyl acetate-co-carbon monoxide) (EVACO) and poly(vinyl chloride) (PVC). The composition of these blends was varied from 10:90 to 90:10 of PVC/EVACO (w/w %). Fourier transform infrared spectroscopy revealed an extensive intermolecular attraction between the blend components, which accounts for their mutual solubility. The differential scanning calorimetry study revealed that the blend components are miscible with each other in all proportions as they exhibited a single glass transition temperature. Tensile strength, moduli, and thermal stabilities of these blends significantly improved with increasing proportion of PVC.

引用

页数：12

共 50 条

[1] Foaming of poly(ethylene-co-vinyl acetate) and poly(ethylene-co-vinyl acetate-co-carbon monoxide) and their blends with carbon dioxide
Sarver, Joseph A.
Sumey, Jenna L.
Williams, Michael L.
Bishop, John P.
Dean, David M.
Kiran, Erdogan
JOURNAL OF APPLIED POLYMER SCIENCE, 2018, 135 (07)
[2] Foaming of poly(ethylene-co-vinyl acetate) and poly(ethylene-co-vinyl acetate-co-carbon monoxide) and their blends with carbon dioxide
Kiran, Erdogan (ekiran@vt.edu), 1600, John Wiley and Sons Inc, Postfach 10 11 61, 69451 Weinheim, Boschstrabe 12, 69469 Weinheim, Deutschland, 69469, Germany (135):
[3] Mechanical properties, miscibility, thermal stability, and rheology of poly(propylene carbonate) and poly(ethylene-co-vinyl acetate) blends
Wu, Dandan
Li, Wu
Hao, Yanping
Li, Zonglin
Yang, Huili
Zhang, Huiliang
Zhang, Huixuan
Dong, Lisong
POLYMER BULLETIN, 2015, 72 (04) : 851 - 865
[4] Mechanical properties, miscibility, thermal stability, and rheology of poly(propylene carbonate) and poly(ethylene-co-vinyl acetate) blends
Dandan Wu
Wu Li
Yanping Hao
Zonglin Li
Huili Yang
Huiliang Zhang
Huixuan Zhang
Lisong Dong
Polymer Bulletin, 2015, 72 : 851 - 865
[5] Investigation of miscibility of poly(vinyl chloride) with poly(ethylene-co-vinyl acetate) by viscosimetric method
Imren, Dilek
Boztug, Ali
Basan, S.
MATERIALS RESEARCH INNOVATIONS, 2006, 10 (02) : 47 - +
[6] Influence of multiwalled carbon nanotubes on the structure and properties of poly(ethylene-co-vinyl acetate-co-carbon monoxide) nanocomposites
George, Gibin
Mahendran, Arunjunairaj
Murugesan, Selvakumar
Anandhan, S.
POLYMER COMPOSITES, 2021, 42 (09) : 4412 - 4423
[7] Poly(vinyl chloride) as a common solvent for enhancing the miscibility of poly(ethylene-co-vinyl acetate) poly(styrene-co-acrylonitrile) blends
Lizymol, PP
Thomas, S
JOURNAL OF MATERIALS SCIENCE LETTERS, 1998, 17 (06) : 507 - 510
[8] 2D NMR studies of poly(ethylene-co-vinyl acetate-co-carbon monoxide)
Savant, Deepa M.
Reddy, D. Venkat
McCord, Elizabeth F.
Rinaldi, Peter L.
MACROMOLECULES, 2007, 40 (12) : 4199 - 4210
[9] Miscibility in blends of poly(ethylene-co-vinyl nitrate) and poly(vinyl methyl ketone)
Kondo, M
Akiba, I
Akiyama, S
E-POLYMERS, 2002,
[10] THERMAL, FLAME AND MECHANICAL-BEHAVIOR OF TERNARY BLENDS OF POLY(VINYL CHLORIDE), POLY(ETHYLENE-CO-VINYL ACETATE) AND POLY(STYRENE-CO-ACRYLONITRILE)
LIZYMOL, PP
THOMAS, S
THERMOCHIMICA ACTA, 1994, 233 (02) : 283 - 295

← 1 2 3 4 5 →