Adsorption of phosphate from municipal effluents using cryptocrystalline magnesite: complementing laboratory results with geochemical modelling

The use of low-cost and locally available material in the treatment of wastewater has recently become an issue of interest, and magnesite as a low-cost material has been used for the removal of heavy metals in wastewater and has also shown potential as an adsorbent for the removal of phosphates in wastewater. In this study, batch experiments were conducted to evaluate the effectiveness of cryptocrystalline magnesite in the removal of phosphates from wastewater. Parameters optimized include the following: contact time, dosage, ions concentration and pH. Optimum conditions were observed to be 60min of agitation, 1g of dosage, 100mgL(-1) ions concentration, 1:100 S/L ratios and pH 10. The phosphate removal efficiency was found to be greater than 99% at an adsorption capacity of 20mgg(-1) of magnesite under the optimized conditions. Adsorption kinetics fitted well to pseudo-second-order kinetics than pseudo-first-order kinetics with pore diffusion also acting as a major rate governing step, hence proving chemisorption. Adsorption isotherms fitted well to Langmuir adsorption isotherm than Freundlich adsorption isotherms, demonstrating monolayer adsorption. PHREEQC geochemical model showed Mg-3(PO4)(2) and MgHPO4:3H(2)O as the phosphate-bearing mineral phases formed in the removal of phosphate. The optimized method is thus proposed for the application for phosphate removal from wastewater at household and municipal plant levels.