Effect and Optimization of Process Conditions during Solvolysis and Torrefaction of Pine Sawdust Using the Desirability Function and Genetic Algorithm

被引:6
|
作者
Ikegwu, Ugochukwu M. [1 ]
Ozonoh, Maxwell [1 ,2 ]
Okoro, Nnanna-Jnr M. [1 ,3 ]
Daramola, Michael O. [1 ,4 ]
机构
[1] Univ Witwatersrand, Sch Chem & Met Engn, Fac Engn & Built Environm, ZA-2050 Johannesburg, South Africa
[2] Enugu State Univ Sci & Technol, Dept Chem Engn, Enugu, Nigeria
[3] Fed Univ Technol Owerri, Dept Environm Management, Owerri, Nigeria
[4] Univ Pretoria, Fac Engn Built Environm & Informat Technol, Dept Chem Engn, ZA-0028 Pretoria, South Africa
来源
ACS OMEGA | 2021年 / 6卷 / 31期
基金
新加坡国家研究基金会;
关键词
WET TORREFACTION; HYDROTHERMAL CARBONIZATION; BIOMASS TORREFACTION; ENZYMATIC-HYDROLYSIS; SUGARCANE BAGASSE; DRY TORREFACTION; PRETREATMENT; FUEL; PYROLYSIS; WOOD;
D O I
10.1021/acsomega.1c00857
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
Understanding optimal process conditions is an essential step in providing high-quality fuel for energy production, efficient energy generation, and plant development. Thus, the effect of process conditions such as the temperature, time, nitrogen-to-solid ratio (NSR), and liquid-to-solid ratio (LSR) on pretreated waste pine sawdust (PSD) via torrefaction and solvolysis is presented. The desirability function approach and genetic algorithm (GA) were used to optimize the processes. The response surface methodology (RSM) based on Box-Behnken design (BBD) was used to determine the effect of the process conditions mentioned above on the higher heating value (HHV), mass yield (MY), and energy enhancement factor (EEF) of biochar/hydrochar obtained from waste PSD. Seventeen experiments were designed each for torrefaction and solvolysis processes. The benchmarked process conditions were as follows: temperature, 200-300 degrees C; time, 30-120 min; NSR/LSR, 4-5. In this study, the operating temperature was the most influential variable that affected the pretreated fuel's properties, with the NSR and LSR having the least effect. The oxygen-to-carbon content ratio and the HHV of the pretreated fuel sample were compared between the two pretreatment methods investigated. Solvolysis pretreatment showed a higher reduction in the oxygen-to-carbon content ratio of 47%, while 44% reduction was accounted for the torrefaction process. A higher mass loss and energy content were also obtained from solvolysis than the torrefaction process. From the optimization process results, the accuracy of the optimal process conditions was higher for GA (299 degrees C, 30.07 min, and 4.12 NSR for torrefaction and 295.10 degrees C, 50.85 min, and 4.55 LSR for solvolysis) than that of the desirability function based on RSM. The models developed were reliable for evaluating the operating process conditions of the methods studied.
引用
收藏
页码:20112 / 20129
页数:18
相关论文
共 50 条
  • [1] Optimization of torrefaction conditions of coffee industry residues using desirability function approach
    Buratti, C.
    Barbanera, M.
    Lascaro, E.
    Cotana, F.
    WASTE MANAGEMENT, 2018, 73 : 523 - 534
  • [2] Kinetic Study of the Isothermal Degradation of Pine Sawdust during Torrefaction Process
    Ikegwu, Ugochukwu Michael
    Ozonoh, Maxwell
    Daramola, Michael Olawale
    ACS OMEGA, 2021, 6 (16): : 10759 - 10769
  • [3] Optimization of a gas metal arc welding process using the desirability function and the genetic algorithm
    Kim, D
    Rhee, S
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2004, 218 (01) : 35 - 41
  • [4] Valorization of Sewage Sludge with Pine Sawdust as Biochar: Optimization of the Torrefaction Conditions and Biochar Quality
    Godekmerdan, Elif
    Kocar, Gunnur
    GAZI UNIVERSITY JOURNAL OF SCIENCE, 2024, 37 (02): : 556 - 574
  • [5] Parametric optimization of edm process of aluminium boron carbide composite using desirability function approach and genetic algorithm
    Thangadurai, K. R.
    Asha, A.
    DYNAMICS OF MACHINES AND MECHANISMS, INDUSTRIAL RESEARCH, 2014, 592-594 : 684 - +
  • [6] Optimization of the Solid-State Copper Brazing Condition Using Desirability Function and Genetic Algorithm
    Jattakul, Prajak
    Mhoraksa, Thiti
    Kanlayasiri, Kannachai
    ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2024, 49 (11) : 14729 - 14739
  • [7] Multi-response simulation optimization using genetic algorithm within desirability function framework
    Pasandideh, Seyed Hamid Reza
    Niaki, Seyed Taghi Akhavan
    APPLIED MATHEMATICS AND COMPUTATION, 2006, 175 (01) : 366 - 382
  • [8] A Hybrid Genetic Algorithm for Multiresponse Parameter Optimization within Desirability Function Framework
    He, Z.
    Zhu, P. F.
    2009 IEEE 16TH INTERNATIONAL CONFERENCE ON INDUSTRIAL ENGINEERING AND ENGINEERING MANAGEMENT, VOLS 1 AND 2, PROCEEDINGS, 2009, : 613 - 617
  • [9] Process Optimization using Genetic Algorithm
    Kumar, M. Pravin
    Vijayachitra, S.
    PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON CONTROL, AUTOMATION, COMMUNICATION AND ENERGY CONSERVATION INCACEC 2009 VOL 1, 2009, : 255 - +
  • [10] Optimal HTS Fingerprint Definitions by Using a Desirability Function and a Genetic Algorithm
    Cabrera, Alvaro Cortes
    Petrone, Paula M.
    JOURNAL OF CHEMICAL INFORMATION AND MODELING, 2018, 58 (03) : 641 - 646