Microstructure of Laser Cladded Cobalt-based Alloy Coating on T10 Tool Steel

被引：0
|
作者：
Zhao Qian [1 ]
Zhang Yong Kang [1 ]
Cui Cheng Yun [1 ]
Cui Xi Gui [1 ]
Lu Jin Zhong [1 ]
机构：
[1] Jiangsu Univ, Sch Mech Engn, Zhenjiang 212013, Peoples R China
来源：
FUNCTIONAL MANUFACTURING TECHNOLOGIES AND CEEUSRO II | 2011年 / 464卷
关键词：
Laser cladding; Co-based alloy; Microstructure; Phase composition;
D O I：
10.4028/www.scientific.net/KEM.464.694
中图分类号：
TP39 [计算机的应用];
学科分类号：
081203 ; 0835 ;
摘要：
Co-based alloy coating was fabricated by powder feeding laser cladding on T10 tool steel. The microstructure and phase composition were investigated by scanning electron microscope (SEM) and X-ray diffractometer (XRD). The results showed that the different solidification microstructures on the section, such as planar, cellular and dendrite formed from the interface to the surface. The main phase gamma-Co and another phase Cr23C6 existed in the original coating, however, the main phase gamma-Co was unchanged, and another phase was replaced by Cr7C3 accompanying with Co3C and Co4B precipitations after aging treatment.
引用
收藏
页码：694 / 697
页数：4
相关论文
共 50 条
  • [1] Study on the Properties of the Laser Cladded Cobalt-based Alloy Coating on T10 Tool Steel
    Cui ChengYun
    Cui XiGui
    Zhang YongKong
    Zhao Qian
    Lu JinZhong
    FUNCTIONAL MANUFACTURING TECHNOLOGIES AND CEEUSRO II, 2011, 464 : 686 - 689
  • [2] Microstructure and properties of cobalt-based alloy coating on tool steel surface prepared by laser cladding
    Wang, Hong-Ying
    Cui, Cheng-Yun
    Zhou, Jie
    Jilin Daxue Xuebao (Gongxueban)/Journal of Jilin University (Engineering and Technology Edition), 2010, 40 (04): : 1000 - 1004
  • [3] Microstructure of Laser Processed T10 Carbon Tool Steel
    Xianzhang BU Fine Mech.Mater.and Technol.Dept.
    JournalofMaterialsScience&Technology, 1993, (04) : 289 - 292
  • [4] Characteristics of cobalt-based alloy coating on tool steel prepared by powder feeding laser cladding
    Cui, Chengyun
    Guo, Zuoxing
    Liu, Yuhua
    Xie, Qiongqiong
    Wang, Zheng
    Hu, Jiandong
    Yao, Yuan
    OPTICS AND LASER TECHNOLOGY, 2007, 39 (08): : 1544 - 1550
  • [5] Microstructure and wear resistance of laser clad cobalt-based alloy/SiCp composite coating
    Li, MX
    Si, SH
    He, YZ
    Sun, GX
    JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2004, 11 (04) : 59 - 62
  • [6] Microstructure and Wear Resistance of Laser Clad Cobalt-Based Alloy/SiCp Composite Coating
    LI Ming-xi
    SI Song-hua
    HE Yi-zhu
    SUN Guo-xiong
    JournalofIronandSteelResearch(International), 2004, 11 (04) : 59 - 62
  • [7] LASER CLADDING OF A COBALT-BASED ALLOY - PROCESSING PARAMETERS AND MICROSTRUCTURE
    FRENK, A
    HENCHOZ, N
    KURZ, W
    ZEITSCHRIFT FUR METALLKUNDE, 1993, 84 (12): : 886 - 892
  • [8] Microstructure and fractural morphology of cobalt-based alloy laser cladding
    Chen, H
    Pan, CX
    JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2003, 18 (03): : 30 - 32
  • [9] Microstructure and Fractural Morphology of Cobalt-based Alloy Laser Cladding
    陈浩
    JournalofWuhanUniversityofTechnology-MaterialsScience, 2003, (03) : 30 - 32
  • [10] Microstructure and fractural morphology of cobalt-based alloy laser cladding
    Chen Hao
    Pan Chun-xu
    Journal of Wuhan University of Technology-Mater. Sci. Ed., 2003, 18 (3): : 30 - 32
12345