Fibre-reinforced cemented soils compressive and tensile strength assessment as a function of filament length

This study aims to develop a dosage methodology based on tensile and compressive strength for artificially cemented fibre reinforced soils considering filament length. The controlling parameters evaluated were the fibre length (l), the cement content (C), the porosity (eta) and the porosity/cement ratio (eta/C-iv). A number of unconfined compression and split tensile tests were carried out in the present work. The results show that fibre insertion in the cemented soil, for the whole range of cement content studied, and the increase of reinforcement length improve unconfined compressive and split tensile strengths. It was shown that the porosity/cement ratio, in which volumetric cementitious material content is adjusted by an exponent (0.28 for all the fibre-reinforced and non-reinforced cemented soil mixtures) to end in unique correlations for each mixture, is a good parameter in the evaluation of the unconfined compressive and split tensile strength of the fibre-reinforced and non-reinforced cemented soil studied. Analysis of variance (ANOVA) performed on the results of a factorial experiment considering the effect of adjusted cement content, fibre length and porosity showed that all of these factors are significant in affecting the measured changes in split tensile and unconfined compressive strength values. Finally, unique dosage relationships could be achieved linking the unconfined compressive strength (q(u)) and the split tensile strength (q(t)) of the sandy soil studied with porosity/cement ratio (eta/C-iv) and fibre length (l). (C) 2016 Elsevier Ltd. All rights reserved.