Room and elevated temperature shear strength of sealants for solid oxide fuel cells

被引：17
|
作者：
Osipova, T. [1 ]
Wei, J. [1 ]
Pecanac, G. [1 ]
Malzbender, J. [1 ]
机构：
[1] Forschungszentrum Julich GmbH, IEK 2, D-52425 Julich, Germany
来源：
CERAMICS INTERNATIONAL | 2016年 / 42卷 / 11期
关键词：
Solid oxide fuel cells; Sealants; Mechanical properties; Torsion; Shear strength; Creep; GLASS-CERAMIC SEALANTS; FORSCHUNGSZENTRUM JULICH; MECHANICAL-PROPERTIES; FRACTURE ENERGIES; COATINGS; BEHAVIOR; STACKS; TESTS;
D O I：
10.1016/j.ceramint.2016.05.064
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The shear strength of glass-ceramic sealants was measured in torsion to aid the developments of robust sealants that can withstand the combined complex stress situation typical for solid oxide fuel cell stacks. The specimens consisted of hour-glass-shaped samples, with the sealant layer in typical application relevant thickness between two steel plates. Partially crystallized sealant materials with either silver particles or 8YSZ fibers as filler material were tested and compared with respect to their shear strength and failure behavior at room and elevated temperatures up to 800 degrees C. The results emphasize the importance of interfacial bonding as well the effect of creep properties of sealant and steel substrates onto the testing results. An outlook on improvements of testing procedure and specimens' geometry is given. (C) 2016 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
引用
收藏
页码：12932 / 12936
页数：5
相关论文
共 50 条
  • [1] The analysis of torsional shear strength test of sealants for solid oxide fuel cells
    Hasanabadi, M. Fakouri
    Faghihi-Sani, M. A.
    Kokabi, A. H.
    Malzbender, J.
    CERAMICS INTERNATIONAL, 2017, 43 (15) : 12546 - 12550
  • [2] Sealants for solid oxide fuel cells
    Fergus, JW
    JOURNAL OF POWER SOURCES, 2005, 147 (1-2) : 46 - 57
  • [3] Room- and high-temperature torsional shear strength of solid oxide fuel/electrolysis cell sealing material
    Hasanabadi, M. Fakouri
    Kokabi, A. H.
    Faghihi-Sani, M. A.
    Gross-Barsnick, S. M.
    Malzbender, J.
    CERAMICS INTERNATIONAL, 2019, 45 (02) : 2219 - 2225
  • [4] The effect of room temperature and high temperature exposure on the elastic modulus, hardness and fracture toughness of glass ceramic sealants for solid oxide fuel cells
    Zhao, Yilin
    Malzbender, Juergen
    Gross, Sonja M.
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2011, 31 (04) : 541 - 548
  • [5] Torsional shear strength of novel glass-ceramic composite sealants for solid oxide fuel cell stacks
    Greven, Beatriz Cela
    Gross-Barsnick, Sonja
    Koppitz, Thomas
    Conradt, Reinhard
    Smeacetto, Federico
    Ventrella, Andrea
    Ferraris, Monica
    INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2018, 15 (02) : 286 - 295
  • [6] Glass fiber reinforced sealants for solid oxide fuel cells
    Timurkutluk, Bora
    Altan, Tolga
    Celik, Selahattin
    Timurkutluk, Cigdem
    Palaci, Yuksel
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2019, 44 (33) : 18308 - 18318
  • [7] Glass-based sealants for solid oxide fuel cells
    不详
    AMERICAN CERAMIC SOCIETY BULLETIN, 2021, 100 (07): : 22 - 23
  • [8] FRACTURE ENERGIES OF BRITTLE SEALANTS FOR PLANAR SOLID OXIDE FUEL CELLS
    Malzbender, Juergen
    Steinbrech, Rolf W.
    Singheiser, Lorenz
    Batfalsky, Peter
    ADVANCES IN SOLID OXIDE FUEL CELLS, 2005, 26 (04): : 285 - 291
  • [9] Fracture toughness and strength distribution at room temperature of zirconia tapes used for electrolyte supported solid oxide fuel cells
    Fleischhauer, Felix
    Terner, Mark
    Bermejo, Raul
    Danzer, Robert
    Mai, Andreas
    Graule, Thomas
    Kuebler, Jakob
    JOURNAL OF POWER SOURCES, 2015, 275 : 217 - 226
  • [10] Micromechanical testing of glass–ceramic sealants for solid oxide fuel cells
    Jürgen Malzbender
    Yilin Zhao
    Journal of Materials Science, 2012, 47 : 4342 - 4347
12345