Development of a smart insole for medical and sports purposes

被引:20
|
作者
Tan, Adin Ming [1 ,3 ]
Fuss, Franz Konstantin [1 ,3 ]
Weizman, Yehuda [1 ,3 ]
Troynikov, Olga [2 ,3 ]
机构
[1] RMIT Univ, Sch Aerosp Mech & Mfg Engn, Melbourne, Vic 3083, Australia
[2] RMIT Univ, Sch Fash & Text, Melbourne, Vic 3056, Australia
[3] Wound Management Innovat Cooperat Res Ctr, Brisbane, Qld 4101, Australia
关键词
Smart Insole; plantar pressure measurement; gait analysis; piezoresistive material; high resolution; PRESSURE;
D O I
10.1016/j.proeng.2015.07.191
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
A study was conducted to determine the performance of a low cost plantar measuring device. The aim of the device was to establish an in-shoe measurement system with high resolution and to take relatively accurate measurements. The calibration method for the smart material was established with the use of a Kistler force plate. The coefficient of determination r(2) of the force against resistance calibration curve was 0.974. The residual standard deviation amounted to 13.91 N. The r(2) value of the repetitive loading experiments amounted to 0.981. The residual standard deviation was 70.35 N for forces larger than 700 N. From the data obtained, the insole is deemed to be sufficiently accurate for quantitative analysis. (C) 2015 The Authors. Published by Elsevier Ltd.
引用
收藏
页码:152 / 156
页数:5
相关论文
共 50 条
  • [1] Smart insole sensors for sports and rehabilitation
    Tamm, Tarmo
    Paerlin, Karel
    Tiimus, Tonis
    Leemets, Kaur
    Terasmaa, Tonis
    Must, Indrek
    NANOSENSORS, BIOSENSORS, AND INFO-TECH SENSORS AND SYSTEMS 2014, 2014, 9060
  • [2] DEVELOPMENT OF A TOTALLY EMBEDDED SMART INSOLE
    Tabrizi, Mohammad M.
    Sharifnezhad, Ali
    Agheli, Mahdi
    PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2018, VOL 5A, 2018,
  • [3] Development of A Smart Insole System for Gait and Performance Monitoring
    Leemets, Kaur
    Terasmaa, Tonis
    Jaakson, Paul
    Kume, Alar
    Tamm, Tarmo
    PROCEEDINGS OF THE 2015 INTERNATIONAL CONFERENCE ON MATERIAL SCIENCE AND APPLICATIONS (ICMSA 2015), 2015, 3 : 713 - 718
  • [4] Development of smart insole for cycle time measurement in sewing process
    Eung Tae Kim
    Sungmin Kim
    Fashion and Textiles, 8
  • [5] Development of smart insole for cycle time measurement in sewing process
    Kim, Eung Tae
    Kim, Sungmin
    FASHION AND TEXTILES, 2021, 8 (01)
  • [6] Development of a Smart Insole Device for Lower Limb Postoperative Rehabilitation Training
    Fang, Yinfang
    Cheng, Xiao
    Li, Fangxia
    Sha, Liansen
    Zhao, Wen
    Kuang, Shaolong
    2017 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND BIOMIMETICS (IEEE ROBIO 2017), 2017, : 2699 - 2703
  • [7] Consumer perceptions on smart wearable devices for medical and wellness purposes
    Capalbo, Isabella
    Penhaker, Marek
    Peter, Lukas
    Proto, Antonino
    2019 IEEE TECHNOLOGY & ENGINEERING MANAGEMENT CONFERENCE (TEMSCON), 2019,
  • [8] User Acceptance of Smart Watch for Medical Purposes: An Empirical Study
    Al-Maroof, Rana Saeed
    Alhumaid, Khadija
    Alhamad, Ahmad Qasim
    Aburayya, Ahmad
    Salloum, Said
    FUTURE INTERNET, 2021, 13 (05):
  • [9] Development of a mist computing device for a smart insole aiming on human gait analysis
    Spyropoulos, Dimitrios
    Giannopoulos, Fotios
    Spandonidis, Christos C.
    2022 11TH INTERNATIONAL CONFERENCE ON MODERN CIRCUITS AND SYSTEMS TECHNOLOGIES (MOCAST), 2022,
  • [10] A survey on smart shoe insole systems
    Saidani, Salma
    Haddad, Rim
    Mezghani, Neila
    Bouallegue, Ridha
    2018 INTERNATIONAL CONFERENCE ON SMART APPLICATIONS, COMMUNICATIONS AND NETWORKING (SMARTNETS), 2018,