High-gloss injection molded part surfaces - Quantitative topographical evaluation of mold steel and polymer surface.

被引：0

作者：

Berger, Gerald R. ^{[1
]}

Friesenbichler, Walter ^{[2
,3
]}

Reitter, Michael ^{[5
]}

Jutz, Stefan

Langecker, Guenter R. ^{[3
,4
]}

机构：

[1] Polymer Competence Ctr Leoben PCCL, Leoben, Austria

[2] Univ Leoben, Inst Kunststoffverarbeitung, Leoben, Austria

[3] Polymer Competence Ctr, Leoben, Austria

[4] Univ Leoben, Lehrstuhl Kunststoffverarbeitung, Leoben, Austria

[5] Gebauer&Griller Kabelwerk GmbH, A-2170 Poysdorf, Austria

来源：

MATERIALS TESTING | 2010年 / 52卷 / 04期

关键词：

D O I：

10.3139/120.110121

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

High-gloss injection molded part surfaces - Quantitative topographical evaluation of mold steel and polymer surface. High-gloss injection molded part surfaces are used in design and functional applications. Polymer grade and processing are influencing the surface quality, additionally, a high quality mold steel surface is a basic requirement. 12 different high-gloss polished steel surfaces were evaluated by using white light interferometry. 3D roughness analysis was used to determine 3 topographical quality parameters, which consider different lateral surface defect features like orange peel (waviness) and worse specular reflection (roughness and micro-roughness). Moreover, the replication into the polymers polypropylene and polycarbonate was examined.

引用

页码：211 / 221

页数：11

共 3 条

[1] Control of gloss defect on high-gloss injection-molded surfaces
Jinsu Gim
Byungohk Rhee
Korea-Australia Rheology Journal, 2021, 33 : 133 - 141
[2] Control of gloss defect on high-gloss injection-molded surfaces
Gim, Jinsu
Rhee, Byungohk
KOREA-AUSTRALIA RHEOLOGY JOURNAL, 2021, 33 (02) : 133 - 141
[3] Causes of the Gloss Transition Defect on High-Gloss Injection-Molded Surfaces
Gim, Jinsu
Han, Eunsu
Rhee, Byungohk
Friesenbichler, Walter
Gruber, Dieter P.
POLYMERS, 2020, 12 (09)

← 1 →