Investigation of drilling composite sandwich structures

被引：34
|
作者：
Khoran, M. [1 ]
Ghabezi, P. [2 ]
Frahani, M. [2 ]
Besharati, M. K. [2 ]
机构：
[1] Esfarayen Univ Technol, Esfarayen 9661998195, Iran
[2] Univ Tehran, Sch Mech Engn, Coll Engn, Tehran, Iran
来源：
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY | 2015年 / 76卷 / 9-12期
关键词：
Cutting speed; Drilling; Feed rate; Panel sandwich; Delamination; MACHINING PARAMETERS; CUTTING PARAMETERS; DELAMINATION; OPTIMIZATION;
D O I：
10.1007/s00170-014-6427-x
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
A full factorial experimental design was used to assess the importance of the drilling parameters. Digital photography technique was used to evaluate the damages from drilling. The drilling operation was assessed based on two introduced factors, including the delamination factor (DF) and uncut fiber factor (UCFF). Analysis of the experimental results for DF indicated that feed rate was the most significant parameter. On the other sides, experimental results for UCFF showed that feed rate had the greatest influence. Also, the results revealed that the both factors were increased by the increase of feed rate and there was an optimum point of cutting speed and tool diameter in the evaluation of UCFF. Drilling of balsa wood composite sandwich panel had the best quality followed by corrugated foam and PVC foam sandwich panels.
引用
收藏
页码：1927 / 1936
页数：10
相关论文
共 50 条
  • [1] Investigation of drilling composite sandwich structures
    20144100089937
    Ghabezi, P., 1927, Springer London (76): : 9 - 12
  • [2] Investigation of drilling composite sandwich structures
    M. Khoran
    P. Ghabezi
    M. Frahani
    M. K. Besharati
    The International Journal of Advanced Manufacturing Technology, 2015, 76 : 1927 - 1936
  • [3] Delamination during drilling in polyurethane foam composite sandwich structures
    S. C. Sharma
    M. Krishna
    H. N. Narasimha Murthy
    Journal of Materials Engineering and Performance, 2006, 15 : 306 - 310
  • [4] Delamination during drilling in polyurethane foam composite sandwich structures
    Sharma, S. C.
    Krishna, M.
    Murthy, H. N. Narasimha
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2006, 15 (03) : 306 - 310
  • [5] Investigation of the Effects of Drilling on Mechanical Joints in Composite Structures
    Fathi, Pourya
    Petrudi, Amin Moslemi
    Scurtu, Ionut Cristian
    INTERNATIONAL CONFERENCE ON SUSTAINABLE FUTURE AND ENVIRONMENTAL SCIENCE, 2021, 635
  • [6] Drilling of composite structures
    Lachaud, F
    Piquet, R
    Collombet, F
    Surcin, L
    COMPOSITE STRUCTURES, 2001, 52 (3-4) : 511 - 516
  • [7] An Investigation on Low Velocity Impact Response of Multilayer Sandwich Composite Structures
    Salami, S. Jedari
    Sadighi, M.
    Shakeri, M.
    Moeinfar, M.
    SCIENTIFIC WORLD JOURNAL, 2013,
  • [8] An Investigation on the Strength of Insert Joints of Composite-Honeycomb Sandwich Structures
    Choi, Ji-Young
    Song, Keun-Il
    Kweon, Jin-Hwe
    Choi, Jin-Ho
    Kim, Kwang-Soo
    Jang, Young-Soon
    COMPOSITES RESEARCH, 2007, 20 (05): : 26 - 33
  • [9] Investigation into high-speed impact response of composite sandwich structures
    Ismail, Sikiru O.
    Firouzsalari, Saeed Eyvazinejad
    Naseem, Shehryar
    Oladapo, Bankole, I
    JOURNAL OF COMPOSITE MATERIALS, 2025,
  • [10] COMPOSITE SANDWICH STRUCTURES - AN OVERVIEW
    Parparita, Mihai
    Bere, Paul
    Biruk-urban, Katarzyna
    ACTA TECHNICA NAPOCENSIS SERIES-APPLIED MATHEMATICS MECHANICS AND ENGINEERING, 2024, 67 (01): : 275 - 280
12345