Local damage in a 5-harness satin weave composite under static tension: Part I - Experimental analysis

被引:63
|
作者
Daggumati, S. [1 ]
De Baere, I. [1 ]
Van Paepegem, W. [1 ]
Degrieck, J. [1 ]
Xu, J. [2 ]
Lomov, S. V. [2 ]
Verpoest, I. [2 ]
机构
[1] Univ Ghent, Dept Mat Sci & Engn, B-9000 Ghent, Belgium
[2] Katholieke Univ Leuven, Dept Met & Mat Engn, B-3001 Louvain, Belgium
关键词
Textile composite; Transverse cracking; Acoustic emission; Multiscale modelling; Weft yarn damage; THERMOPLASTIC COMPOSITES; RESIDUAL-STRESSES; ACOUSTIC-EMISSION; ACCUMULATION;
D O I
10.1016/j.compscitech.2010.07.003
中图分类号
TB33 [复合材料];
学科分类号
摘要
This paper presents an experimental damage analysis of a 5-harness satin weave carbon-PPS (polyphenylene sulphide) composite under uni-axial static tensile load In order to understand the local damage behaviour, tensile tests were performed and accompanied by acoustic emission (AE) and microscopic analysis of the composite specimen. These tests enable us to detect the damage initiation stress as well as the damage initiation location in the composite Microscopic observation of the tested composite laminates allowed the characterization of the sequence of intra-yarn transverse damage (perpendicular to the load direction) occurrence at different locations in the laminate, starting from crack initiation to the final failure of the composite The earliest crack events occurred inside the laminate middle layers, followed by the damage on the traction free surface It is observed that the initiation of the transverse crack, the location of the crack in the weft yarn cross-section (centre/near the edges) is affected by the relative position of the ply in the laminate (local nesting configuration) The first part of this paper deals with the experimental characterization of sequential damage in a 5-harness satin weave composite. Part II deals with the meso-FE modeling of damage using a satin weave unit cell, and the correlation between experimental and numerical results. (C) 2010 Elsevier Ltd All rights reserved
引用
收藏
页码:1926 / 1933
页数:8
相关论文
共 19 条
  • [1] Local strain in a 5-harness satin weave composite under static tension: Part I - Experimental analysis
    Ghent University, Department of Materials Science and Engineering, Sint-Pietersnieuwstraat 41, 9000 Gent, Belgium
    不详
    Compos. Sci. Technol., 8 (1171-1179):
  • [2] Local strain in a 5-harness satin weave composite under static tension: Part I - Experimental analysis
    Daggumati, S.
    Voet, E.
    Van Paepegem, W.
    Degrieck, J.
    Xu, J.
    Lomov, S. V.
    Verpoest, I.
    COMPOSITES SCIENCE AND TECHNOLOGY, 2011, 71 (08) : 1171 - 1179
  • [3] Local damage in a 5-harness satin weave composite under static tension: Part II - Meso-FE modelling
    Ghent University, Department of Materials Science and Engineering, Sint-Pietersnieuwstraat 41, 9000 Gent, Belgium
    不详
    Compos. Sci. Technol., 13 (1934-1941):
  • [4] Local damage in a 5-harness satin weave composite under static tension: Part II - Meso-FE modelling
    Daggumati, S.
    Van Paepegem, W.
    Degrieck, J.
    Xu, J.
    Lomov, S. V.
    Verpoest, I.
    COMPOSITES SCIENCE AND TECHNOLOGY, 2010, 70 (13) : 1934 - 1941
  • [5] Local strain in a 5-harness satin weave composite under static tension: Part II - Meso-FE analysis
    Daggumati, S.
    Van Paepegem, W.
    Degrieck, J.
    Praet, T.
    Verhegghe, B.
    Xu, J.
    Lomov, S. V.
    Verpoest, I.
    COMPOSITES SCIENCE AND TECHNOLOGY, 2011, 71 (09) : 1217 - 1224
  • [6] Multiscale Simulation of Damage Progression in 5-Harness Satin Weave Composites
    Qiang Xu
    Shaoxing Qu
    JOM, 2015, 67 : 1491 - 1498
  • [7] Multiscale Simulation of Damage Progression in 5-Harness Satin Weave Composites
    Xu, Qiang
    Qu, Shaoxing
    JOM, 2015, 67 (07) : 1491 - 1498
  • [8] Automatic detection of fiber orientation on CF/PPS composite materials with 5-harness satin weave
    Alexandru Şerban
    Fibers and Polymers, 2016, 17 : 1925 - 1933
  • [9] Automatic Detection of Fiber Orientation on CF/PPS Composite Materials with 5-harness Satin Weave
    Serban, Alexandru
    FIBERS AND POLYMERS, 2016, 17 (11) : 1925 - 1933
  • [10] Fatigue and post-fatigue stress-strain analysis of a 5-harness satin weave carbon fibre reinforced composite
    Daggumati, S.
    De Baere, I.
    Van Paepegem, W.
    Degrieck, J.
    Xu, J.
    Lomov, S. V.
    Verpoest, I.
    COMPOSITES SCIENCE AND TECHNOLOGY, 2013, 74 : 20 - 27