Bending deformation behavior of Zr65Cu17.5Ni10Al7.5 bulk metallic glass with different solidification cooling rate

被引:3
|
作者
Hu, Y. [1 ,2 ]
Yan, H. H. [2 ]
Yan, Z. J. [1 ]
Wang, X. G. [1 ]
机构
[1] Taiyuan Univ Sci & Technol, Sch Mat Sci & Engn, Taiyuan 030024, Shanxi, Peoples R China
[2] Shanxi Key Lab Metall Mat Forming Theory & Techno, Taiyuan 030024, Shanxi, Peoples R China
基金
中国国家自然科学基金;
关键词
FREE-VOLUME; MECHANICAL-BEHAVIOR; SHEAR BANDS; PLASTICITY; STRENGTH; RELAXATION; FRACTURE; STRAIN;
D O I
10.1063/1.5040682
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
In order to further clarify the relationship between the free volume and bending plasticity, the bending properties of Zr(65)Cu(17.5)Ni(10A)l(7.5) bulk metallic glass (BMG) samples with different thicknesses corresponding to different solidification cooling rates were investigated. The results show that the bending plasticity of Zr(65)Cu(17.5)Ni(10A)l(7.5) BMG decreases with the decrease of cooling rate, which is consistent with the evolution of shear bands density revealed by the investigation of microstructure. These phenomena are mainly attributed to the decrease of free volume content with the decrease of cooling rates in spite of the increase of nanocrystallization fraction, which further confirm that free volume plays a crucial role in the deformation process of the BMGs. (c) 2018 Author(s).
引用
收藏
页数:7
相关论文
共 50 条
  • [1] Thermophysical properties of Zr65Cu17.5Ni10Al7.5 bulk metallic glass
    Sergiienko, Ruslan A.
    Sharma, Adit
    Shcheretskyi, Oleksandr A.
    Zadorozhnyy, Vladislav Yu
    Shcheretskyi, Volodymyr O.
    Myslyvchenko, Oleksandr M.
    Verkhovliuk, Anatolii M.
    Stepashkin, Andrey A.
    Qiao, J. C.
    JOURNAL OF NON-CRYSTALLINE SOLIDS, 2025, 652
  • [2] Oxidation behavior in super-plastic microforming of Zr65Cu17.5Ni10Al7.5 bulk metallic glass
    Wang, Jun
    Liao, Guanglan
    Yu, Qiang
    Shi, Tielin
    MATERIALS AND COMPUTATIONAL MECHANICS, PTS 1-3, 2012, 117-119 : 1377 - 1382
  • [3] Thermophysical Properties of Zr65Cu17.5Ni10Al7.5 Bulk Metallic Glass(vol 652 , 123400, 2025)
    Sergiienko, Ruslan A.
    Sharma, Adit
    Shcheretskyi, Oleksandr A.
    Zadorozhnyy, Vladislav Yu.
    Shcheretskyi, Volodymyr O.
    Myslyvchenko, Oleksandr M.
    Verkhovliuk, Anatolii M.
    Stepashkin, Andrey A.
    Qiao, J. C.
    JOURNAL OF NON-CRYSTALLINE SOLIDS, 2025, 656
  • [4] Mechanism of internal friction in bulk Zr65Cu17.5Ni10Al7.5 metallic glass -: art. no. 184208
    Cai, B
    Shang, LY
    Cui, P
    Eckert, J
    PHYSICAL REVIEW B, 2004, 70 (18): : 1 - 5
  • [5] Effect of vanadium substitution for zirconium on the glass forming ability and mechanical properties of a Zr65Cu17.5Ni10Al7.5 bulk metallic glass
    Khademian, Nima
    Gholamipour, Reza
    Shahri, Farzad
    Tamizifar, Morteza
    JOURNAL OF ALLOYS AND COMPOUNDS, 2013, 546 : 41 - 47
  • [6] Transformation of amorphous passive oxide film on Zr65Cu17.5Ni10Al7.5 metallic glass ribbons
    Sarac, Baran
    Kvaratskheliya, Askar
    Zadorozhnyy, Vladislav
    Ivanov, Yurii P.
    Klyamkin, Semen
    Xi, Lixia
    Berdonosova, Elena
    Kaloshkin, Sergey
    Zadorozhnyy, Mikhail
    Eckert, Juergen
    JOURNAL OF ALLOYS AND COMPOUNDS, 2022, 929
  • [7] Deformation behavior of Zr65Cu17.5Ni10Al7.5 in superplastic forming with silicon mould: Simulation and application
    Yang Fan
    Shi Tielin
    Yu Qiang
    Liao Guanglan
    JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2014, 29 (02): : 250 - 255
  • [8] Deformation behavior of Zr65Cu17.5Ni10Al7.5 in superplastic forming with silicon mould: Simulation and application
    Fan Yang
    Tielin Shi
    Qiang Yu
    Guanglan Liao
    Journal of Wuhan University of Technology-Mater. Sci. Ed., 2014, 29 : 250 - 255
  • [9] Ni tracer diffusion in the bulk metallic glasses Zr41Ti14Cu12.5Ni10Be22.5 and Zr65Cu17.5Ni10Al7.5
    Wenwer, F
    Knorr, K
    Macht, MP
    Mehrer, H
    DEFECT AND DIFFUSION FORUM, 1997, 143 : 831 - 835
  • [10] Effect of hydrogen on Zr65Cu17.5Al7.5Ni10 metallic glass
    Ismail, N
    Gebert, A
    Uhlemann, M
    Eckert, J
    Schultz, L
    JOURNAL OF ALLOYS AND COMPOUNDS, 2001, 314 (1-2) : 170 - 176