Temperature-Controlled Triaxial Compression Test of Tire Strip-Reinforced Silty Clay

被引:3
|
作者
Ma, Qiang [1 ]
Shu, Hang [1 ]
Xiao, Henglin [1 ]
Huang, Chaogang [1 ]
机构
[1] Hubei Univ Technol, Sch Civil Engn & Architecture, Wuhan 430068, Peoples R China
基金
中国国家自然科学基金;
关键词
Triaxial test; Shear strength; Tire-reinforced materials; Normalized stress-strain; SHEAR-STRENGTH; WASTE TIRES; BEHAVIOR; SAND; PERFORMANCE; GEOSYNTHETICS;
D O I
10.1007/s13369-020-04428-3
中图分类号
O [数理科学和化学]; P [天文学、地球科学]; Q [生物科学]; N [自然科学总论];
学科分类号
07 ; 0710 ; 09 ;
摘要
Through triaxial compression test, the effect of different confining pressures, temperatures and volume reinforcement ratios on the strength of tire strip-reinforced silty clay was investigated. The stress-strain characteristics of the tire-reinforced silty clay were normalized, and the stress-strain relationship normalization equation was established. The test results show that the shear strength of tire strip-reinforced silty clay increases with the increase in confining pressure, and the reinforcement effect increases with the increase in confining pressure. At different temperatures, the shear strength is negatively correlated with temperature. At a confining pressure of 400 kPa, the shear strength of the sample with a volume reinforcement ratio of 3% was 3.16 times that of the unreinforced sample. Under the ratio of 3% volume reinforcement, the effect coefficient under various confining pressures was 2-3 times of that under unreinforced conditions. The stress-strain relationship of reinforced silty clay is normalized by using (sigma(1) - sigma(3))(ult) as the normalization factor, which has good normalization characteristics.
引用
收藏
页码:4247 / 4256
页数:10
相关论文
共 50 条
  • [1] Temperature-Controlled Triaxial Compression Test of Tire Strip-Reinforced Silty Clay
    Qiang Ma
    Hang Shu
    Henglin Xiao
    Chaogang Huang
    Arabian Journal for Science and Engineering, 2020, 45 : 4247 - 4256
  • [2] Development and application of a temperature-controlled dynamic triaxial test system
    Institution of Geotechnical Engineering, Ningbo University, Ningbo
    Zhejiang
    315211, China
    Yanshilixue Yu Gongcheng Xuebao, 7 (1345-1352):
  • [3] Temperature-controlled triaxial compression/creep test device for thermodynamic properties of soft sedimentary rock and corresponding theoretical prediction
    Zhang, Sheng
    Nakano, Hirotomo
    Xiong, Yonglin
    Nishimura, Tomohiro
    Zhang, Feng
    JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING, 2010, 2 (03) : 255 - 261
  • [5] Study on triaxial test and constitutive prediction model of frozen silty clay
    Teng, Zhen-Chao
    Teng, Yun-Chao
    Liu, Jia-Lin
    Zhou, Ya-Dong
    Liu, Xiao-Yan
    Li, Zheng-Wei
    Tao, Cheng-Yun
    FRONTIERS IN EARTH SCIENCE, 2023, 10
  • [6] Studies about creep characteristic of silty clay on triaxial drained creep test
    Wang YanFang
    Zhou ZhiGang
    Cai ZhengYin
    ADVANCES IN CIVIL AND INDUSTRIAL ENGINEERING IV, 2014, 580-583 : 355 - +
  • [7] Development and verification of temperature-controlled pile-soil interface triaxial shear test system
    Li Chun-hong
    Kong Gang-qiang
    Zhang Xin-rui
    Liu Han-long
    Xu Xiao-liang
    Xu Jun-kui
    ROCK AND SOIL MECHANICS, 2019, 40 (12) : 4955 - 4962
  • [8] Triaxial compression test on multilayer reinforced tailing sand
    Ning Zhang-xuan
    Feng Mei-sheng
    Wang Feng-jiang
    Wang Lai-gui
    ROCK AND SOIL MECHANICS, 2010, 31 (12) : 3784 - 3788
  • [9] Study on reinforced tailing sand by triaxial compression test
    Wang, Feng-Jiang
    Liaoning Gongcheng Jishu Daxue Xuebao (Ziran Kexue Ban)/Journal of Liaoning Technical University (Natural Science Edition), 2003, 22 (05):
  • [10] THERMOMECHANICAL AND TEMPERATURE-CONTROLLED ROLLING OF PLATE AND HOT STRIP
    LORENZ, K
    HOF, WM
    HULKA, K
    KAUP, K
    LITZKE, H
    SCHRAPE, U
    STAHL UND EISEN, 1981, 101 (09): : 57 - 64