Microstructure and Mechanical Properties of AZ31B Magnesium Alloy Brazed Joint Using Al Matrix Filler Metal

被引：0
|
作者：
Ma Li [1 ]
He Dingyong [1 ]
Li Xiaoyan [1 ]
Jiang Jianmin [1 ]
机构：
[1] Beijing Univ Technol, Coll Mat Sci & Engn, Beijing 100124, Peoples R China
来源：
RARE METAL MATERIALS AND ENGINEERING | 2011年 / 40卷 / 09期
关键词：
magnesium alloy; Al matrix filler metal; brazing; microstructure; mechanical properties;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In order to join wrought magnesium alloy AZ31B plates, an Al matrix filler metal was developed to join them by means of high-frequency induction brazing. The microstructure and phase constitution of the brazed joint were investigated by scanning electron microscopy, X-ray diffraction and X-ray energy dispersive spectroscopy. The mechanical properties and microhardness of the brazed joint were also tested. The results show that the single Mg(32)(Al,Zn)(49) phase in the original filler metal is consumed after the soldering process; moreover, alpha-Mg solid solution and beta-Mg(17)(Al,Zn)(12) phase are formed in brazing region due to the intensive alloying between the molten filler metal and the base metal in the process of brazing. The average tensile strength of the butted joint is 71 MPa and the average shearing strength of the overlapped joint is 44 MPa. The fracture surface of the brazed joint exhibits an intergranular fracture feature and the crack originates from the hard beta-Mg(17)(Al,Zn)(12) phase.
引用
收藏
页码：1600 / 1604
页数：5
相关论文
共 22 条
  • [1] Baker H., 2006, ALLOY PHASE DIAGRAMS
  • [2] CHEN ZH, 2004, MAGNESIUM ALLOYS
  • [3] Aluminum element effect for electron beam welding of similar and dissimilar magnesium-aluminum-zinc alloys
    Chi, Chao-Ting
    Chao, Chuen-Guang
    Liu, Tzeng-Feng
    Lee, Chuan-Hua
    [J]. SCRIPTA MATERIALIA, 2007, 56 (09) : 733 - 736
  • [4] Microstructure and mechanical properties of magnesium alloy AZ31B laser beam welds
    Coelho, R. S.
    Kostka, A.
    Pinto, H.
    Riekehr, S.
    Kocak, M.
    Pyzalla, A. R.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 485 (1-2): : 20 - 30
  • [5] Committee on Brazing and Soldering, 1982, BRAZ MAN
  • [6] CUI ZQ, 1995, METALLOGRAPHY THERMA
  • [7] [郭强 GUO Qiang], 2006, [金属热处理, Heat treatment of metals], V31, P77
  • [8] Jacobson D.M., 2005, PRINCIPLES BRAZING
  • [9] Jin Tou-nan, 2002, Chinese Journal of Nonferrous Metals, V12, P110
  • [10] Liang SJ, 2009, RARE METAL MAT ENG, V38, P1276
123