Study on a new technological scheme for cold press forging forming of step holes in thick sheet metal

被引：1
|
作者：
Liu, Jianlin [1 ]
Wang, Kesheng [1 ]
Chen, Xiaowei [1 ]
机构：
[1] Ningbo Univ Technol, Sch Mech Engn, Ningbo 315016, Zhejiang, Peoples R China
来源：
EMERGING SYSTEMS FOR MATERIALS, MECHANICS AND MANUFACTURING | 2012年 / 109卷
关键词：
thick sheet metal; step hole; cold press forging; finite element analysis; PREDICTION;
D O I：
10.4028/www.scientific.net/AMM.109.187
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
An new technological scheme for a two-step cold press forging of step holes in a thick metal sheet was proposed. Finite element analysis on the two-step process is carried out by using DEFORM-3D. Velocity shade contours are obtained. The study shows that the technique can form step holes in thick sheet metal and increase their strength, According to the numerical simulation's process parameter, an experimental die is designed, the FEA results are in good agreement with the experimental data.
引用
收藏
页码：187 / 190
页数：4
相关论文
共 24 条
  • [1] Press forging forming of stepped holes in thick sheet metal
    Cao, Xujun
    Wang, Kesheng
    Han, Yu
    Lin, Chongchao
    MECHATRONICS AND INTELLIGENT MATERIALS III, PTS 1-3, 2013, 706-708 : 234 - 237
  • [2] Numerical Simulation of cold press forging forming for stepped hole of thin sheet metal
    Wang, Kesheng
    Liu, Jianlin
    Chen, Xiaowei
    FRONTIERS OF MANUFACTURING AND DESIGN SCIENCE II, PTS 1-6, 2012, 121-126 : 249 - 253
  • [3] Study on a new technological scheme for cold forging of spur gears
    Hu, Chengliang
    Wang, Kesheng
    Liu, Quankun
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 187 : 600 - 603
  • [4] An expert system for ensuring the reliability of the technological process of cold sheet metal forming
    Kashapova, L. R.
    Pankratov, D. L.
    Utyaganov, P. P.
    INTERNATIONAL SCIENTIFIC-TECHNICAL CONFERENCE ON INNOVATIVE ENGINEERING TECHNOLOGIES, EQUIPMENT AND MATERIALS 2015 (ISTC-IETEM-2015), 2016, 134
  • [5] Study on the Forming Process of Sheet Metal with High Aspect Ratio Holes
    Tu, K. Y.
    Chang, H. C.
    Wang, H. T.
    Chen, P. J.
    Cheng, T. J.
    Chen, F. K.
    Chang, Y. M.
    PROCEEDINGS OF THE 8TH INTERNATIONAL CONFERENCE ON MULTI-MATERIAL MICRO MANUFACTURE (4M 2011), 2011, : 92 - 95
  • [6] SHEET-METAL FORMING AT ELEVATED TEMPERATURES - A NEW PRESS DESIGN.
    Barrett, D.J.
    Sheet Metal Industries, 1976, 53 (09): : 174 - 175
  • [7] Study on edgetrimming of holes in the thick steel plates by metal plastic forming technology
    Matysiak W.
    Bartkowski D.
    Hatala M.
    Zajac J.
    Radchenko S.
    Čep R.
    Key Engineering Materials, 2016, 669 : 87 - 94
  • [8] A new effective and reliable implicit scheme for the simulation of sheet metal forming processes
    Kawka, M
    Bathe, KJ
    SIMULATION OF MATERIALS PROCESSING: THEORY, METHODS AND APPLICATIONS, 2001, : 615 - 619
  • [9] Simulation and experiment on workability for cold pressure forming of sheet metal part with step cross-section
    Lu, Xianfeng
    Li, Hufeng
    Zhang, Yuerong
    Zhou, Yong
    Chinese Journal of Mechanical Engineering (English Edition), 2010, 23 (02): : 161 - 165
  • [10] Simulation and Experiment on Workability for Cold Pressure Forming of Sheet Metal Part with Step Cross-section
    LU Xianfeng1
    Chinese Journal of Mechanical Engineering, 2010, 23 (02) : 161 - 165
123