Mixed lithium phosphates as cathode materials for Li-Ion cells

被引:22
|
作者
Penazzi, N
Arrabito, M
Piana, M
Bodoardo, S
Panero, S
Amadei, I
机构
[1] Politecn Torino, Dept Chem Engn & Mat Sci, I-10129 Turin, Italy
[2] Univ Roma La Sapienza, Dept Chem, I-00185 Rome, Italy
关键词
batteries; lithium insertion; microstructure-final; powders solid state reaction; transition metal oxides;
D O I
10.1016/S0955-2219(03)00568-5
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
LiFexCo(1-x)PO4 (x=0.2, 0.5, 0.8, 1) solid solutions have been prepared by solid state reaction method to sevatudy the electrochemical performance of these olivine structure compounds as cathode material for lithium-ion batteries. SEM observations, X-ray powder diffraction (XRPD) profiles and Rietveld refinement have been carried out to investigate the structural characteristics and morphology of the samples. During the preparations citric acid was added to the reactants to improve the electronic conductivity of the cathode. The results showed that when present in small amounts, Co exerts a beneficial effect mainly at the first cycles where the additive is not effective. At higher Co levels this positive effect seems to cease, probably is still present but hidden by the progressive electrolyte degradation that causes a decay of the electrochemical performance. (C) 2003 Elsevier Ltd. All rights reserved.
引用
收藏
页码:1381 / 1384
页数:4
相关论文
共 50 条
  • [1] Demonstration of mixed metal oxide cathode materials in prismatic Li-ion cells
    Ehrlich, GM
    Gitzendanner, RL
    MATERIALS FOR ELECTROCHEMICAL ENERGY STORAGE AND CONVERSION II-BATTERIES, CAPACITORS AND FUEL CELLS, 1998, 496 : 397 - 401
  • [2] Preparation of cathode materials for Li-ion cells by acid dissolution
    Oh, SH
    Jeong, WT
    Cho, WI
    Cho, BW
    Woo, KA
    JOURNAL OF ALLOYS AND COMPOUNDS, 2005, 391 (1-2) : 296 - 301
  • [3] Perspectives on Li and transition metal fluoride phosphates as cathode materials for a new generation of Li-ion batteries
    Antipov, Evgeny V.
    Khasanova, Nellie R.
    Fedotov, Stanislav S.
    IUCRJ, 2015, 2 : 85 - 94
  • [4] Lithium-enriched polypyrrole as a prospective cathode material for Li-ion cells
    Joseph John
    M. Manoj
    K. M. Anilkumar
    V. S. Pradeep
    S. Jayalekshmi
    Ionics, 2018, 24 : 2565 - 2574
  • [5] Lithium-enriched polypyrrole as a prospective cathode material for Li-ion cells
    John, Joseph
    Manoj, M.
    Anilkumar, K. M.
    Pradeep, V. S.
    Jayalekshmi, S.
    IONICS, 2018, 24 (09) : 2565 - 2574
  • [6] Flat plate prismatic Li-ion cells using advanced cathode materials
    Ehrlich, GM
    Puglia, FJ
    Gitzendanner, R
    Hellen, B
    Marsh, C
    JOURNAL OF POWER SOURCES, 1999, 81 : 863 - 866
  • [7] Development of novel cathode materials for Li-ion batteries
    Popov, BN
    White, RE
    THIRTEENTH ANNUAL BATTERY CONFERENCE ON APPLICATIONS AND ADVANCES, 1998, : 387 - 392
  • [8] The oxygen vacancy in Li-ion battery cathode materials
    Tang, Zhen-Kun
    Xue, Yu-Feng
    Teobaldi, Gilberto
    Liu, Li-Min
    NANOSCALE HORIZONS, 2020, 5 (11) : 1453 - 1466
  • [9] Environmentally friendly cathode materials for Li-ion batteries
    Banov, B. I.
    Vasilchina, H. C.
    BULGARIAN CHEMICAL COMMUNICATIONS, 2011, 43 (01): : 7 - 16
  • [10] Polyanion compounds as cathode materials for li-ion batteries
    Wu, X.B.
    Wu, X.H.
    Guo, J.H.
    Li, S.D.
    Liu, R.
    Mcdonald, M.J.
    Yang, Y.
    Green Energy and Technology, 2015, 172 : 93 - 134