Scientific and technological fundamentals for the development of the controlled short circuiting MIG/MAG welding process (CCC) - A literature review. Part 3 of 3: Principles of the controlled current short-circuiting MIG/MAG systems

被引：0
|
作者：
Goncalves e Silva, Regis Henrique [1 ]
Dutra, Jair Carlos [1 ]
Gohr, Raul, Jr. [1 ]
机构：
[1] Univ Fed Santa Catarina, Dept Engn Mecan, Lab Soldagem, Florianopolis, SC, Brazil
来源：
SOLDAGEM & INSPECAO | 2008年 / 13卷 / 01期
关键词：
MIG/MAG welding; CCC; controlled short-circuiting; controlled metal transfer;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The third part of the series handles, firstly, the basic functioning of the conventional voltage controlled shortcircuiting MIG/MAG welding process and the relating power source static behaviour. Short-circuiting metal transfer dynamics related mechanisms are dealt with. A set of MIG/MAG stability concepts is presented, whereas no total agreement is found in the welding comunity. An authors' purpouse on this matter is suggested. Finally, the functioning of systems like the CCC is explained, along with LABSOLDA's scientific and technological experience in this process, since the first analogic control until the most modern software controlled version. Also, CCC future is described, being part of the Advanced Control System (SAC).
引用
收藏
页码：70 / 81
页数：12
相关论文
共 12 条
  • [1] Scientific and technological fundamentals for the development of the controlled short circuiting MIG/MAG welding process (CCC) - A review of the literature. Part 3 of 3: Principles of controlled current short circuiting MIG/MAG systems
    Welding Laboratory, Department of Mechanical Engineering, Federal University of Santa Catarina, Florianópolis, Santa Catarina, Brazil
    Weld. Int., 2009, 4 (251-260):
  • [2] Scientific and technological fundamentals for the development of the controlled short circuiting MIG/MAG welding process (CCC) -: A literature review.: Part 1 of 3:: History and wire-electrode melting aspects
    Goncalves E Silva, Regis Henrique
    Carlos Dutra, Jair
    Gohr, Raul, Jr.
    SOLDAGEM & INSPECAO, 2007, 12 (03): : 237 - 243
  • [3] Scientific and Technological Fundamentals for the Development of the Controlled Short Circuiting MIG/MAG Welding Process (CCC) - A Literature Review. Part 2 of 3: Metal Droplet Formation, Shield Gases, Penetration Mechanisms, Heat Input and Economical Aspects
    Goncalves e Silva, Regis Henrique
    Dutra, Jair Carlos
    Gohr, Raul, Jr.
    SOLDAGEM & INSPECAO, 2007, 12 (04): : 326 - 335
  • [4] Influence of the Welding Parameter on the MIG/MAG Process Stability working with Short-circuiting
    Souza, Daniel
    Rossi, Marcelo Lemos
    Keocheguerians, Flavio
    do Nascimento, Vinicius Castanheira
    Vilarinho, Louriel Oliveira
    Scotti, Americo
    SOLDAGEM & INSPECAO, 2011, 16 (01): : 22 - 32
  • [5] Assessment of Controlled Short-Circuiting Application in Filling Passes with MIG/MAG Double Wire Process
    Caimacan, Dumitru
    Mishchenko, Andrii
    Scotti, Americo
    SOLDAGEM & INSPECAO, 2015, 20 (01): : 16 - 27
  • [6] Controlled short-circuiting MIG/MAG welding process (CCC) applied to the root pass in the construction of offshore oil pipelines - Process analysis tools
    Henrique Goncalves e Silva, Rigis
    Dutra, Jair Carlos
    Gohr, Raul, Jr.
    de Oliveira, Moises Alves
    PROCEEDINGS OF THE SIXTEENTH (2006) INTERNATIONAL OFFSHORE AND POLAR ENGINEERING CONFERENCE, VOL 4, 2006, : 177 - +
  • [7] Scientific and technological fundamentals for the development of the controlled short-circuiting MIG/MAG welding process: A review of the literature. Part 2 of 3. Metal droplet formation, shield gases, penetration mechanisms, heat input and economical aspects
    Silva, Régis Henrique Gonçalves
    Dutra, Jair Carlos
    Gohr Jr., Raul
    Welding International, 2009, 23 (02) : 141 - 149
  • [8] The Influence of the Welding Voltage and of the Shielding Gas on the Correlation between Inductance and Metal Transfer Regularity in Short-circuiting MIG/MAG Welding
    Souza, Daniel
    Rossi, Marcelo Lemos
    Keocheguerians, Flavio
    do Nascimento, Vinicius Castanheira
    Vilarinho, Louriel Oliveira
    Scotti, Americo
    SOLDAGEM & INSPECAO, 2011, 16 (02): : 114 - 122
  • [9] Influence of Metal Transfer Stability and Shielding Gas Composition on CO and CO2 Emissions during Short-circuiting MIG/MAG Welding
    de Meneses, Valter Alves
    Leal, Valdemar Silva
    Scotti, Americo
    SOLDAGEM & INSPECAO, 2016, 21 (03): : 253 - 268
  • [10] MIG/MAG - Short-circuit metal transfer - Control of the current wave form - Fundamentals of the CCC and STT systems
    Dutra, Jair Carlos
    de Silva, Regis Gonçalves
    Welding International, 2009, 23 (03) : 181 - 185
12