Effect of Low Ambient Pressure on Spray Cone Angle of Pressure Swirl Atomizer

被引:5
|
作者
Guo, Zhengyan [1 ,2 ]
Jin, Yi [3 ]
Zhang, Kai [3 ]
Yao, Kanghong [3 ]
Wang, Yunbiao [3 ]
Wu, Di [3 ]
He, Xiaomin [3 ]
Zheng, Mei [4 ]
机构
[1] Northwestern Polytech Univ, Sch Power & Energy, Xian, Shaanxi, Peoples R China
[2] AECC Hunan Aviat Powerplant Res Inst, Zhuzhou, Peoples R China
[3] Nanjing Univ Aeronaut & Astronaut, Coll Energy & Power Engn, Nanjing, Peoples R China
[4] Nanjing Engn Inst Aircraft Syst, AVIC Aviat Key Lab Sci Technol Aero Electromech S, Nanjing, Peoples R China
关键词
ATOMIZATION; INJECTOR;
D O I
10.1155/2021/5539231
中图分类号
V [航空、航天];
学科分类号
08 ; 0825 ;
摘要
Pressure swirl atomizers are widely used in gas turbine combustor; this paper is aimed at researching the effect of low ambient pressure (0.1 MPa to 0.01 MPa, lower than an atmosphere) on the spray cone angle of pressure swirl atomizer. The spray angle is captured by high-speed photography; then, an image post program is used to process the spray angle magnitude. A mathematical model of a single droplet's movement and trajectory based on force analysis is proposed to validate the spray angle variation. The maximum variation of the spray cone angle, which is observed when fuel supply pressure drop through the atomizer is 1 MPa as the ambient pressure decreases from 0.1 MPa to 0.01 MPa, is found to be 23.9%. The experimental results show that the spray cone angle is expected to increase with the ambient pressure decrease; meanwhile, mathematical results agree well with this trend.
引用
收藏
页数:10
相关论文
共 50 条
  • [1] Effects of Trumpet Angle on Spray Angle Characteristics of Pressure Swirl Atomizer
    Chen F.-X.
    He X.-M.
    Zhou J.-W.
    Tuijin Jishu/Journal of Propulsion Technology, 2022, 43 (07):
  • [2] Effect of geometric parameters on the spray cone angle in the pressure swirl injector
    Liu, Juan
    Zhang, Xin-Qiao
    Li, Qing-Lian
    Wang, Zhen-Guo
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING, 2013, 227 (G2) : 342 - 353
  • [3] High pressure effervescent atomization: effect of ambient pressure on spray cone angle
    Sovani, SD
    Chou, E
    Sojka, PE
    Gore, JP
    Eckerle, WA
    Crofts, JD
    FUEL, 2001, 80 (03) : 427 - 435
  • [4] Effect of Inlet Slot Number on the Spray Cone Angle and Discharge Coefficient of Swirl Atomizer
    Rashid, Mohd Syazwan Firdaus Mat
    Hamid, Ahmad Hussein Abdul
    Sheng, Ow Chee
    Ghaffar, Zulkifli Abdul
    INTERNATIONAL SYMPOSIUM ON ROBOTICS AND INTELLIGENT SENSORS 2012 (IRIS 2012), 2012, 41 : 1781 - 1786
  • [5] Pressure-scaling of pressure-swirl atomizer cone angles
    Maurice J. Zucrow Laboratories, School of Mechanical Engineering, Purdue University, West Lafayette, IN 47906-2014, United States
    J. Eng. Gas Turbines Power, 2008, 6
  • [6] MODELING OF A SOLID CONE PRESSURE-SWIRL ATOMIZER
    Chan Tat Leung(The Hong Kong Polytechnic University
    Chinese Journal of Mechanical Engineering(English Edition), 1996, (03) : 185 - 192+198
  • [7] Experimental investigations of spray generated by a pressure swirl atomizer
    Liu, Cunxi
    Liu, Fuqiang
    Yang, Jinhu
    Mu, Yong
    Hu, Chunyan
    Xu, Gang
    JOURNAL OF THE ENERGY INSTITUTE, 2019, 92 (02) : 210 - 221
  • [8] Effect of geometric parameters on spray characteristics of air assisted pressure swirl atomizer
    Gad, H. M.
    Baraya, E. A.
    Farag, T. M.
    Ibrahim, I. A.
    ALEXANDRIA ENGINEERING JOURNAL, 2022, 61 (07) : 5557 - 5571
  • [9] Experimental characterization of a pressure swirl spray by analyzing the half cone angle fluctuation
    Amoresano, A.
    Allouis, C.
    Di Santo, M.
    Iodice, P.
    Quaremba, G.
    Niola, V
    EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2018, 94 : 122 - 133
  • [10] FACTORS INFLUENCING THE EFFECTIVE SPRAY CONE ANGLE OF PRESSURE-SWIRL ATOMIZERS
    CHEN, SK
    LEFEBVRE, AH
    ROLLBUHLER, J
    JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 1992, 114 (01): : 97 - 103