Towards an automatic approach for hardware verification according to ISO 26262 functional safety standard

被引：0
|
作者：
Sini, J. [1 ]
Reorda, M. Sonza [1 ]
Violante, M. [1 ]
Sarson, P. [2 ]
机构：
[1] Politecn Torino, Turin, Italy
[2] Dialog Semicond, Reading, Berks, England
来源：
2018 IEEE 24TH INTERNATIONAL SYMPOSIUM ON ON-LINE TESTING AND ROBUST SYSTEM DESIGN (IOLTS 2018) | 2018年
关键词：
Circuit faults; Hardware; Software; Microcontrollers; Safety; Automotive electronics; Embedded systems; failure analysis; ISO; 26262; standard; Reliability;
D O I：
暂无
中图分类号：
TP3 [计算技术、计算机技术];
学科分类号：
0812 ;
摘要：
The Failure Mode, Effect and Diagnostic Analysis (FMEDA) is a technique widely adopted by automotive industry to assess the level of reliability of hardware designs. Although very useful, it has the problem of taking a long time to complete and requires experts with extensive knowledge of the circuit under consideration. In this paper, it is presented a comparison between the analysis results obtained from an automatic tool developed by the authors with respect to the ones obtained by hand from a team of experts, followed by a critical review of the strengths and weaknesses, about the rules for automatic classification of the faults effects.
引用
收藏
页码：287 / 290
页数：4
相关论文
共 50 条
  • [1] An automatic approach to perform the verification of hardware designs according to the ISO26262 functional safety standard
    Bagalini, E.
    Sini, J.
    Reorda, M. Sonza
    Violante, M.
    Klimesch, H.
    Sarson, P.
    2017 18TH IEEE LATIN AMERICAN TEST SYMPOSIUM (LATS 2017), 2017,
  • [2] Symbolic Execution based Verification of Compliance with the ISO 26262 Functional Safety Standard
    Ahmed, Mazen
    Safar, Mona
    2019 14TH IEEE INTERNATIONAL CONFERENCE ON DESIGN & TECHNOLOGY OF INTEGRATED SYSTEMS IN NANOSCALE ERA (DTIS 2019), 2019,
  • [3] Application of hardware reliability calculation procedures according to ISO 26262 standard
    Famfulik, Jan
    Richtar, Michal
    Rehak, Radek
    Smiraus, Jakub
    Dresler, Pavel
    Fusek, Martin
    Mikova, Jana
    QUALITY AND RELIABILITY ENGINEERING INTERNATIONAL, 2020, 36 (06) : 1822 - 1836
  • [4] Effective Management Of Functional Safety For ISO 26262 Standard
    Stirgwolt, Philip
    59TH ANNUAL RELIABILITY AND MAINTAINABILITY SYMPOSIUM (RAMS), 2013,
  • [5] Performing Safety Evaluation on Detailed Hardware Level according to ISO 26262
    Adler, Nico
    Otten, Stefan
    Cuenot, Philippe
    Mueller-Glaser, Klaus
    SAE INTERNATIONAL JOURNAL OF PASSENGER CARS-ELECTRONIC AND ELECTRICAL SYSTEMS, 2013, 6 (01): : 102 - 113
  • [6] Efficient Methodology for ISO26262 Functional Safety Verification
    da Silva, Felipe Augusto
    Bagbaba, Ahmet Cagri
    Hamdioui, Said
    Sauer, Christian
    2019 IEEE 25TH INTERNATIONAL SYMPOSIUM ON ON-LINE TESTING AND ROBUST SYSTEM DESIGN (IOLTS 2019), 2019, : 255 - 256
  • [7] Functional Safety Extensions to Automotive SPICE According to ISO 26262
    Johannessen, Per
    Halonen, Ojvind
    Orsmark, Ola
    SOFTWARE PROCESS IMPROVEMENT AND CAPABILITY DETERMINATION, 2011, 155 : 52 - 63
  • [8] Capability of single hardware channel for automotive safety applications according to ISO 26262
    Braun, Juergen
    Miedl, Christian
    Geyer, Dirk
    Mottok, Juergen
    Minas, Mark
    2012 INTERNATIONAL CONFERENCE ON APPLIED ELECTRONICS, 2012, : 41 - 45
  • [9] Assessing Automotive Functional Safety Microprocessor with ISO 26262 Hardware Requirements
    Chang, Yung-Chang
    Huang, Li-Ren
    Liu, Hsing-Chuang
    Yang, Chih-Jen
    Chiu, Ching-Te
    2014 INTERNATIONAL SYMPOSIUM ON VLSI DESIGN, AUTOMATION AND TEST (VLSI-DAT), 2014,
  • [10] Deriving a representative variant for the functional safety development according to ISO 26262
    Schranner, Felix S.
    Misheni, Alireza Abassi
    Warnecke, Jork
    RELIABILITY ENGINEERING & SYSTEM SAFETY, 2021, 209
12345