The effect of nozzle configuration on the evolution of jet surface structure

被引:8
|
作者
Gong, Chen [1 ]
Ou, Mingxiong [1 ]
Jia, Weidong [1 ]
机构
[1] Jiangsu Univ, Key Lab Modern Agr Equipment & Technol, Zhenjiang 212013, Jiangsu, Peoples R China
基金
中国国家自然科学基金;
关键词
Liquid jet; Surface structure; Image processing; Wavelength; Nozzle configuration; PRIMARY ATOMIZATION; PRIMARY BREAKUP; LIQUID; INSTABILITY; MODEL;
D O I
10.1016/j.rinp.2019.102572
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The evolution of jet surface structure plays a key role in various atomization related applications. In this paper, the jet surface structures of two different nozzle configurations are captured and measured based on high-speed microscopic photography and a novel image processing method. Results show that the primary wavelength of surface wave decreases exponentially with Weber number and increases linearly with streamwise distance for both two nozzles. The primary wavelength that non-dimensionalized with boundary layer thickness is almost a constant for the same nozzle, but obviously different for different nozzles. The nozzle configuration has a significant effect on the scale of the surface structure when the Weber number is smaller than 50, however, this effect is limited for bigger Weber number.
引用
收藏
页数:11
相关论文
共 50 条
  • [1] Experimental study of jet surface structures and the influence of nozzle configuration
    Gong, Chen
    Yang, Minguan
    Kang, Can
    Wang, Yuli
    FLUID DYNAMICS RESEARCH, 2016, 48 (04)
  • [2] Effect of nozzle diameter on the supersonic jet structure
    Otobe, Yumiko
    Kashimura, Hideo
    Setoguchi, Toshiaki
    Theoretical and Applied Mechanics Japan, 2010, 58 : 213 - 218
  • [3] Effect of nozzle structure on jet flow atomization in vacuum spray
    Li, Jianchang
    Li, Hongyu
    Chen, Jian
    Yang, Yimou
    Zhenkong Kexue yu Jishu Xuebao/Journal of Vacuum Science and Technology, 2014, 34 (02): : 101 - 105
  • [4] Effect of nozzle configurations and jet orientations on thermal performance of jet impingement on convex surface
    Joshi, Jaykumar
    Sahu, Santosh K.
    INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2024, 203
  • [5] The effect of nozzle configuration on stagnation region heat transfer enhancement of axisymmetric jet impingement
    Lee, J
    Lee, SJ
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2000, 43 (18) : 3497 - 3509
  • [6] An experimental study of slot jet impingement cooling on concave surface: effects of nozzle configuration and curvature
    Yang, G
    Choi, M
    Lee, JS
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 1999, 42 (12) : 2199 - 2209
  • [7] Design of a nozzle structure for uniform distribution of active substances in plasma jet honeycomb array configuration
    Li, Hua
    Liang, Zhenbao
    Wang, Fengyun
    Du, Xiaoxia
    Xiao, Wenxiang
    JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A, 2025, 43 (02):
  • [8] THE STRUCTURE OF THE SUBMERGED JET NEAR THE NOZZLE
    ITO, K
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1985, 71 (04): : S129 - S129
  • [9] Structure Design and Disrupting Effect Detection of Short Jet Collision Nozzle
    Zhang S.
    Wu X.
    Liu B.
    Guo H.
    Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery, 2021, 52 (12): : 393 - 399
  • [10] Effect of Special-Shaped Nozzle Structure on Water Jet Performance
    Chen, Lihuan
    Gao, Dianrong
    Cheng, Muzheng
    Cai, Yi
    Guo, Liwen
    PROCESSES, 2022, 10 (10)