Quantitative microstructural characterisation of Ni-base superalloys

被引：43
|
作者：
Penkalla, HJ [1 ]
Wosik, J
Czyrska-Filemonowicz, A
机构：
[1] Res Ctr Julich, Inst Mat & Proc Energy Syst, D-52525 Julich, Germany
[2] Stanislaw Staszic Univ Min & Met, Fac Met & Mat Sci, PL-30059 Krakow, Poland
来源：
MATERIALS CHEMISTRY AND PHYSICS | 2003年 / 81卷 / 2-3期
关键词：
Waspaloy; TEM; HRTEM; AFM; stereological evaluation;
D O I：
10.1016/S0254-0584(03)00037-3
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The Ni-base superalloy Waspaloy was investigated as candidate material for rotor and disc applications in steam turbines of the next generation. Quantitative metallography has been performed using various microscopic techniques. Transmission electron microscopy (TEM) and atomic force microscopy (AFM) have been applied for a stereological evaluation of the particle size distribution, particle number density and volume fraction of the gamma' precipitates. Waspaloy was investigated after heat treatment and after ageing at relevant application temperature of 700 degreesC. In cooling experiments, the influence of the cooling rate on the gamma' formation and growth was studied. The existence of gamma' nano-stals with a volume fraction < 1.5% was observed. (C) 2003 Published by Elsevier Science B.V.
引用
收藏
页码：417 / 423
页数：7
相关论文
共 50 条
  • [1] Microstructural aspects of fatigue in Ni-base superalloys
    Antolovich, Stephen D.
    PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 2015, 373 (2038):
  • [2] Microstructural Stability and Hot Deformation of γ-γ′-δ Ni-Base Superalloys
    Detrois, Martin
    Helmink, Randolph C.
    Tin, Sammy
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2014, 45A (12): : 5332 - 5343
  • [3] Microstructural Stability and Hot Deformation of γ–γ′–δ Ni-Base Superalloys
    Martin Detrois
    Randolph C. Helmink
    Sammy Tin
    Metallurgical and Materials Transactions A, 2014, 45 : 5332 - 5343
  • [4] Microstructural Design of Ni-base Superalloys by Hot Isostatic Pressing
    Ruttert, Benjamin
    Lopez-Galilea, Inmaculada
    Mujica Roncery, Lais
    Theisen, Werner
    HOT ISOSTATIC PRESSING, HIP' 17, 2019, 10 : 107 - 113
  • [5] Modelling of microstructural evolutions in Ni-base superalloys under stress
    Saito, Y
    Tanabe, S
    Onuma, E
    Murakami, H
    Harada, H
    JAPAN INSTITUTE OF METALS, PROCEEDINGS, VOL 12, (JIMIC-3), PTS 1 AND 2: SOLID - SOLID PHASE TRANSFORMATIONS, 1999, : 761 - 764
  • [6] Design of Ni-base superalloys
    Harada, H
    MATERIALS DESIGN APPROACHES AND EXPERIENCES, 2001, : 29 - 39
  • [7] Microstructural characterization of the failures of thermal barrier coatings on Ni-base superalloys
    Yanar, NM
    Kim, G
    Hamano, S
    Pettit, FS
    Meier, GH
    MATERIALS AT HIGH TEMPERATURES, 2003, 20 (04) : 495 - 506
  • [8] High temperature fatigue of Ni-base superalloys: Microstructural and environmental effects
    Pineau, A
    ENGINEERING AGAINST FATIGUE, 1999, : 557 - 565
  • [9] Characterisation of nitrogen-bearing surface layers on Ni-base superalloys
    Dahm, K. L.
    Short, K. T.
    Collins, G. A.
    WEAR, 2007, 263 (625-628) : 625 - 628
  • [10] Ageing kinetics of Ni-base superalloys
    Gorgannejad, Sanam
    Rodas, Ernesto A. Estrada
    Neu, Richard W.
    MATERIALS AT HIGH TEMPERATURES, 2016, 33 (4-5) : 291 - 300
12345