Monitoring of dependences and ratios of normal contact forces on hexagonal idler housings of the pipe conveyor

被引：13
|
作者：
Molnar, Vieroslav [1 ]
Fedorko, Gabriel [1 ]
Andrejiova, Miriam [2 ]
Grincova, Anna [3 ]
Kopas, Melichar [2 ]
机构：
[1] Tech Univ Kosice, Kosice 04200, Slovakia
[2] Tech Univ Kosice, Fac Mech Engn, Kosice 04200, Slovakia
[3] Tech Univ Kosice, Fac Elect Engn & Informat, Kosice 04200, Slovakia
来源：
MEASUREMENT | 2015年 / 64卷
关键词：
Contact force; Rubber-textile conveyor belt; Idler roll; Regression models; BELT CONVEYOR; SIMULATION; MODEL;
D O I：
10.1016/j.measurement.2014.12.055
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Contact forces, which are induced due to a reciprocal contact between the conveyor belt and forming idler rolls during a current operation of the pipe conveyors, are influencing the operational characteristics of these conveyors significantly. Despite of frequent application of the pipe conveyors, the question of contact forces is neglected relatively. This paper analyses closely the contact force values and their dependence on tensional force in order to identify mutual relations taking into consideration the selected factors. (C) 2015 Elsevier Ltd. All rights reserved.
引用
收藏
页码：168 / 176
页数：9
相关论文
共 17 条
  • [1] Contact forces in hexagonal idler housing of pipe conveyor
    1600, Vogel Verlag und Druck GmbH and Co. KG (34):
  • [2] Mathematical models for indirect measurement of contact forces in hexagonal idler housing of pipe conveyor
    Molnar, Vieroslav
    Fedorko, Gabriel
    Stehlikova, Beata
    Michalik, Peter
    Kopas, Melichar
    MEASUREMENT, 2014, 47 : 794 - 803
  • [3] REGRESSION MODEL CHANGE OF NORMAL CONTACT FORCES IN HEXAGONAL IDLER HOUSING FOR PIPE CONVEYOR LOADED WITH TRANSPORTED MATERIAL
    Molnar, Vieroslav
    Stehlikova, Beata
    ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL, 2018, 12 (02): : 244 - 251
  • [4] Influence of tension and release in piped conveyor belt on change of normal contact forces in hexagonal idler housing for pipe conveyor loaded with material
    Molnar, Vieroslav
    Fedorko, Gabriel
    Stehlikova, Beata
    Michalik, Peter
    Kopas, Melichar
    MEASUREMENT, 2016, 84 : 21 - 31
  • [5] Prediction of contact forces on idler rolls of a pipe conveyor idler housing for the needs of its online monitoring
    Molnar, Vieroslav
    Fedorko, Gabriel
    Honus, Stanislav
    Andrejiova, Miriam
    Grincova, Anna
    Michalik, Peter
    MEASUREMENT, 2019, 139 : 177 - 184
  • [6] A regression model for prediction of pipe conveyor belt contact forces on idler rolls
    Molnar, Vieroslav
    Fedorko, Gabriel
    Stehlikova, Beata
    Michalik, Peter
    Weiszer, Michal
    MEASUREMENT, 2013, 46 (10) : 3910 - 3917
  • [7] Research about influence of the tension forces, asymmetrical tensioning and filling rate of pipe conveyor belt filled with the material on the contact forces of idler rolls in hexagonal idler housing
    Stehlikova, Beata
    Molnar, Vieroslav
    Fedorko, Gabriel
    Michalik, Peter
    Paulikova, Alena
    MEASUREMENT, 2020, 156 (156)
  • [8] Utilisation of measurements to predict the relationship between contact forces on the pipe conveyor idler rollers and the tension force of the conveyor belt
    Molnar, Vieroslav
    Fedorko, Gabriel
    Homolka, Lubor
    Michalik, Peter
    Tuckova, Zuzana
    MEASUREMENT, 2019, 136 : 735 - 744
  • [9] Analysis of asymmetrical effect of tension forces in conveyor belt on the idler roll contact forces in the idler housing
    Molnar, Vieroslav
    Fedorko, Gabriel
    Stehlikova, Beata
    Tomaskova, Marianna
    Hulinova, Zdenka
    MEASUREMENT, 2014, 52 : 22 - 32
  • [10] Regression model design for the prediction of pipe conveyor belt contact forces on idler rollers by experimental tests
    1600, Trans Tech Publications Ltd (611):
12