Calculation of Electric Field Distribution and Temperature Profile of End Corona Protection Systems on Large Rotating Machines by Use of Finite Element Model

被引：0

作者：

Staubach, Christian ^{[1
]}

Kempen, Stefan ^{[1
]}

Pohlmann, Friedhelm ^{[1
]}

机构：

[1] Siemens AG Energy, D-45478 Mulheim An Der Ruhr, Germany

来源：

CONFERENCE RECORD OF THE 2010 IEEE INTERNATIONAL SYMPOSIUM ON ELECTRICAL INSULATION (ISEI) | 2010年

关键词：

D O I：

暂无

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

Future developments of end corona protection (ECP) systems require calculation of the electrical field strength along the insulating surface and the temperature profile with satisfactory accuracy. This report presents an approach for the exact calculation of relevant physical parameters for a typical ECP configuration based on the finite element method, this approach accounting for the large electrical nonlinearity as well as the weaker thermal nonlinearity of the ECP material. The peculiarities of the implemented calculation algorithm for modeling the electrically and thermally coupled system are presented and the function of the model is verified based on practical tests which confirm the extremely good correlation between the calculated and measured results.

引用

页数：6

共 24 条

[1] Nonlinear resistivity characteristics of end corona protection systems for rotating high voltage machines
Senn, F.
ELEKTROTECHNIK UND INFORMATIONSTECHNIK, 2012, 129 (05): : 306 - 313
[2] Examination of anisotropic material characteristics in Outer Corona Protection (OCP) systems in large rotating machines
Staubach, A.
Hirsch, H.
Schmidt, G.
Pohlmann, F.
2016 IEEE INTERNATIONAL CONFERENCE ON DIELECTRICS (ICD), VOLS 1-2, 2016, : 426 - 429
[3] INVESTIGATION OF IDEAL ANISOTROPIC MATERIAL PROPERTIES FOR OUTER CORONA PROTECTION SYSTEMS IN LARGE ROTATING MACHINES
Staubach, Axel
Schmidt, Guido
Pohlmann, Friedhelm
Hirsch, Holger
2018 IEEE ELECTRICAL INSULATION CONFERENCE (EIC), 2018, : 365 - 368
[4] Adaptive finite element meshing at each iterative calculation for electromagnetic field analysis of rotating machines
Yamazaki, Katsumi
Watari, Shinjiro
Saeki, Toshihiro
Sugiura, Yoshinori
ELECTRICAL ENGINEERING IN JAPAN, 2008, 164 (03) : 78 - 91
[5] A Fast Finite Element Numerical Modeling Method for the Calculation of Electric Field in Large Scale Complex Model
Du Z.
Tian Y.
Jin S.
Zhu L.
Xie Y.
Wang J.
Ma Z.
Ruan J.
Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, 2018, 38 (24): : 7166 - 7173
[6] Mechanical Calculation of Stator Core Vibration of Rotating Electric Machines Using an Analytical Beam Element Model
de Barros, Allan
Gerlach, Martin Enno
Huang, Xudong
Langfermann, Markus
Ponick, Bernd
Ebrahimi, Amir
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2024, 60 (01) : 47 - 56
[7] Finite Element Surrogate Model for Electric Machines with Revolving Field - Application to IPM Motors
Ionel, Dan M.
Popescu, Mircea
2009 IEEE ENERGY CONVERSION CONGRESS AND EXPOSITION, VOLS 1-6, 2009, : 607 - +
[8] Precise mesh control method on model surface for finite element electric field calculation
Tian Y.
Du Z.
Liu S.
Jin S.
Meng S.
Jin Q.
Zhou W.
Dianli Zidonghua Shebei/Electric Power Automation Equipment, 2019, 39 (11): : 205 - 210
[9] Finite Element Model for Temperature Distribution Calculation of HTS Cable Based on Experiment Data
Long, Jiajie
Chen, Guilun
Wang, Zhe
Zhang, Anlong
Zhou, Yuhan
Li, Xianhao
Zhang, Haipeng
Xu, Ying
Li, Jingdong
Shi, Jing
Tang, Yuejin
Zhang, Zhe
Ren, Li
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2023, 33 (08)
[10] Calculation of mode field distribution for arbitrary refractive index profile optical fiber by finite element method
Yang, Shixin
Ren, Lang
Sheng, Keming
Fang, Yin
Qiangjiguang Yu Lizishu/High Power Laser and Particle Beams, 2000, 12 (03): : 297 - 300

← 1 2 3 →