Investigation on microstructural and mechanical properties of Cu reinforced with Sic composites prepared by microwave sintering process

被引：63

作者：

Sathish, T. ^{[1
]}

Chandramohan, D. ^{[1
]}

Vijayan, V. ^{[2
]}

Sebastian, P. J. ^{[3
]}

机构：

[1] St Peters Inst Higher Educ & Res, Dept Mech Engn, Chennai 600054, Tamil Nadu, India

[2] K Ramakrishanan Coll Technol, Dept Mech Engn, Trichy 621112, Tamil Nadu, India

[3] UNAM, Inst Energias Renovables, Temixco 62580, Morelos, Mexico

来源：

JOURNAL OF NEW MATERIALS FOR ELECTROCHEMICAL SYSTEMS | 2019年 / 22卷 / 01期

关键词：

Copper; silicon carbide; graphite; hardness test; compressive test; microstructure test; PARTICLE-SIZE; COPPER;

D O I：

10.14447/jnmes.v22i1.a02

中图分类号：

O646 [电化学、电解、磁化学];

学科分类号：

081704 ;

摘要：

In this present experimental studysix different metal matrix composites has been fabricated using pure copper (Cu) as a base material reinforced with silicon carbide (Sic) and graphite as one of the additives each time i.e., different volume fractions Sic and graphite. Powder state mixing technique was employed for the different constituent. After mixing, powders were poured in metallic die then specimens are sintered through Microwave sintering (2.45 GHz, 3.2 kW) and various tests such as hardness, compressive and microstructure of the composite specimens has been carried out.

引用

页码：5 / 9

页数：5

共 50 条

[1] An investigation on the influence of sintering temperature on microstructural, physical and mechanical properties of Cu-SiC composites
Somani, Nalin
Tyagi, Y. K.
Gupta, Nitin Kumar
JOURNAL OF ENGINEERING DESIGN AND TECHNOLOGY, 2024, 22 (01) : 77 - 88
[2] Investigation on microstructural and mechanical properties of B4C-aluminum matrix composites prepared by microwave sintering
Ghasali, Ehsan
Alizadeh, Masoud
Ebadzadeh, Touradj
Pakseresht, Amir Hossein
Rahbari, Ali
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2015, 4 (04): : 411 - 415
[3] An investigation into the microstructural and mechanical properties of the ZrB2/SiC composites prepared by silicon infiltration
Nilforoushan, Mohammad Reza
Kazemzadeh, Parya
Babaei, Behzad
Tayebi, Morteza
Yaghoubi, Mohammad
MATERIALS RESEARCH EXPRESS, 2021, 8 (04)
[4] Microstructures and Properties of Cu-rGO Composites Prepared by Microwave Sintering
Chen, Xuebin
Zhao, Lei
Jiang, Liwu
Wang, Haizhou
MATERIALS, 2021, 14 (17)
[5] Mechanical properties of SiCp/Cu composites prepared by electric conduction sintering
Wang, Chunhua
Guan, Shaokang
Li, Shoushan
Zhang, Rui
PROGRESSES IN FRACTURE AND STRENGTH OF MATERIALS AND STRUCTURES, 1-4, 2007, 353-358 : 1402 - 1405
[6] Effects of mechanical milling time on densification, microstructural characteristics and hardness of Cu-SiC nanocomposites prepared by conventional sintering process
Akbarpour, M. R.
MATERIALS CHEMISTRY AND PHYSICS, 2021, 261
[7] Effect of sintering techniques on microstructural, mechanical and tribological properties of Al-SiC composites
Shaikh, Mohd Bilal Naim
Aziz, Tariq
Arif, Sajjad
Ansari, Akhter H.
Karagiannidis, Panagiotis G.
Uddin, Mohammad
SURFACES AND INTERFACES, 2020, 20
[8] A comparative study of structural and mechanical properties of Al-Cu composites prepared by vacuum and microwave sintering techniques
Matli, Penchal Reddy
Fareeha, Ubaid
Shakoor, Rana Abdul
Mohamed, Adel Mohamed Amer
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2018, 7 (02): : 165 - 172
[9] Microwave absorption and mechanical properties of β-Sic-C structure-function composites prepared by liquid phase sintering
Zhou, Zehua
Wang, Zehua
Yi, Yu
Jiang, Shaoqun
Wang, Gang
MATERIALS LETTERS, 2013, 112 : 66 - 68
[10] Thermoelectric properties of CoSb3 and CoSb3/SiC composites prepared by mechanical alloying and microwave sintering
Zhu, Hanming
Liang, Shaojun
Ouyang, Ting
Yue, Song
Jiang, Jun
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2017, 28 (14) : 10509 - 10515

← 1 2 3 4 5 →