Fast In Situ X-Ray Microtomography Observations of Solidification and Semisolid Deformation of Al-Cu Alloys

被引：28
|
作者：
Suery, Michel [1 ]
Terzi, Sofiane [1 ]
Mireux, Bastien [1 ]
Salvo, Luc [1 ]
Adrien, Jerome [2 ]
Maire, Eric [2 ]
机构：
[1] Univ Grenoble, St Martin Dheres, France
[2] Univ Lyon, Villeurbanne, France
来源：
JOM | 2012年 / 64卷 / 01期
关键词：
TOMOGRAPHY; SUCCINONITRILE; ACETONE;
D O I：
10.1007/s11837-011-0219-7
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The aim of this paper is to report recent results concerning the microstructure evolution observed by continuous in situ x-ray microtomography in Al-Cu alloys during various treatments. These treatments include solidification and tensile deformation in the semisolid state both in solidification and in isothermal conditions. During solidification, x-ray microtomography allows measurement of various microstructure parameters and characterization of the physical mechanisms occurring at the scale of the dendrites. During deformation, liquid flow towards the deformed zone can be observed and quantified together with pore and crack formation in liquid films. These observations are discussed with reference to the formation of defects during solidification.
引用
收藏
页码：83 / 88
页数：6
相关论文
共 50 条
  • [1] Fast In Situ X-Ray Microtomography Observations of Solidification and Semisolid Deformation of Al-Cu Alloys
    Michel Suéry
    Sofiane Terzi
    Bastien Mireux
    Luc Salvo
    Jérôme Adrien
    Eric Maire
    JOM, 2012, 64 : 83 - 88
  • [2] In situ X-ray microtomography study of the solidification and remelted microstructures of Al-Cu alloys
    Terzi, S.
    Boller, E.
    Salvo, L.
    Suery, M.
    INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, 2009, 22 (1-4) : 275 - 278
  • [3] In-Situ X-Ray Microtomography Investigation of the Deformation Mechanisms of Al-Cu Alloys in the Semi-Solid State
    Terzi, Sofiane
    Salvo, Luc
    Suery, Michel
    Adrien, Jerome
    Maire, Eric
    Boller, Elodie
    LIGHT METALS TECHNOLOGY 2009, 2009, 618-619 : 275 - +
  • [4] X-ray monitoring of solidification phenomena in Al-Cu alloys
    Mathiesen, RH
    Arnberg, L
    SOLIDIFICATION AND GRAVITY IV, 2006, 508 : 69 - 74
  • [5] In situ X-ray observation of semi-solid deformation and failure in Al-Cu alloys
    Phillion, A. B.
    Hamilton, R. W.
    Fuloria, D.
    Leung, A. C. L.
    Rockett, P.
    Connolley, T.
    Lee, P. D.
    ACTA MATERIALIA, 2011, 59 (04) : 1436 - 1444
  • [6] In-situ three-dimensional microstructural investigation of solidification of an Al-Cu alloy by ultrafast x-ray microtomography
    Olivire Ludwig
    Marco Dimichiel
    Luc Salvo
    Michel Suéry
    Peter Falus
    Metallurgical and Materials Transactions A, 2005, 36 : 1515 - 1523
  • [7] In-situ three-dimensional microstructural investigation of solidification of an Al-Cu alloy by ultrafast X-ray microtomography
    Ludwig, O
    Dimichiel, M
    Salvo, L
    Suéry, M
    Falus, P
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2005, 36A (06): : 1515 - 1523
  • [8] X-ray Imaging and Controlled Solidification of Al-Cu Alloys Toward Microstructures by Design
    Clarke, Amy J.
    Tourret, Damien
    Imhoff, Seth D.
    Gibbs, Paul J.
    Fezzaa, Kamel
    Cooley, Jason C.
    Lee, Wah-Keat
    Deriy, Alex
    Patterson, Brian M.
    Papin, Pallas A.
    Clarke, Kester D.
    Field, Robert D.
    Smith, James L.
    ADVANCED ENGINEERING MATERIALS, 2015, 17 (04) : 454 - 459
  • [9] In-situ 3D investigation by fast X-ray microtomography of the microstructural changes occurring during partial remelting of Al-Cu alloys
    Suery, Michel
    Salvo, Luc
    Josserond, Charles
    Di Michiel, Marco
    SEMI- SOLID PROCESSING OF ALLOYS AND COMPOSITES, 2006, 116-117 : 231 - 234
  • [10] Combined in situ X-ray radiographic observations and post-solidification metallographic characterisation of eutectic transformations in Al-Cu alloy systems
    Murphy, A. G.
    Browne, D. J.
    Mirihanage, W. U.
    Mathiesen, R. H.
    ACTA MATERIALIA, 2013, 61 (12) : 4559 - 4571
12345