Biosorption of copper, zinc, cadmium and nickel by Chlorella vulgaris

The sorption capacity of the microalga, Chlorella vulgaris, was investigated using different metals (Cu, Zn, Cd and Ni), in both monometallic and bimetallic solutions. The final metal concentrations were significantly low. In the case of copper, an acid pretreatment ( at pH 3) of the biomass was required to avoid an excessive increase in pH and the subsequent precipitation of metal during tests. This pretreatment was not necessary for the rest of the metals. The study of the influence of pH led to a greater metal uptake at a higher pH, suggesting a clear competition between metal cations and protons during the biosorption process. The biomass concentration was also a relevant variable, and the best sorption capacities were achieved at the lowest biomass concentration. pH also had a great influence on the elution of the metal retained by the biomass. The best recovery yields were obtained for the lower pH of the eluent solution. Sorption isotherms were well fitted to the Langmuir model, for both single-metal and two-metal systems. In both cases, the biomass showed a greater affinity for Cd.