Dynamic characteristics of an in-contact headslider considering meniscus force: Part 2 - Application to the disk with random undulation and design conditions

被引：12

作者：

Kato, T ^{[1
]}

Watanabe, S

Matsuoka, H

机构：

[1] Univ Tokyo, Tokyo, Japan

[2] Mech Engn Lab, QMME Special Gr, Tsukuba, Ibaraki 305, Japan

[3] Tottori Univ, Fac Engn, Dept Appl Math & Phys, Tottori 680, Japan

来源：

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME | 2001年 / 123卷 / 01期

关键词：

D O I：

10.1115/1.1330741

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

In Part 1, the authors presented a three-degrees-of freedom (3-DOF) model of an incontact headslider/disk interface (HDI) system and the equations of motion of the incontact headslider considering the meniscus force. Dynamic characteristics of the incontact headslider over sinusoidal disk surface were made clear. In Part 2, using the equations of motion obtained in Part 1, the calculation results Sol the disk with random undulation and design conditions for the in-contact HDI system are described.

引用

页码：168 / 174

页数：7

共 5 条

[1] Dynamic characteristics of an in-contact headslider considering meniscus force: Part 1 - Formulation and application to the disk with sinusoidal undulation
Kato, T
Watanabe, S
Matsuoka, H
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2000, 122 (03): : 633 - 638
[2] Dynamic characteristics of an in-contact head slider considering meniscus force: Part 3 - Wear durability and optimization of surface energy of liquid lubricant under perfect contact condition
Matsuoka, H
Fukui, S
Kato, T
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2002, 124 (04): : 801 - 810
[3] Design of toughened PLA based material for application in structures subjected to severe loading conditions. Part 2. Quasi-static tensile tests and dynamic mechanical analysis at ambient and moderately high temperature
Bouzouita, A.
Notta-Cuvier, D.
Delille, R.
Lauro, F.
Raquez, J. -M.
Dubois, P.
POLYMER TESTING, 2017, 57 : 235 - 244
[4] Grain shape as a factor governing the parameters of diamond electroplated coating of dressing tools. Part 2. Actual grain–graphite form contact area and related characteristics as input data for calculating the conditions of diamond electroplated coating application by electroforming method
M. N. Sheiko
V. N. Skok
O. O. Pasichnyi
Journal of Superhard Materials, 2016, 38 : 47 - 50
[5] Grain shape as a factor governing the parameters of diamond electroplated coating of dressing tools. Part 2. Actual grain-graphite form contact area and related characteristics as input data for calculating the conditions of diamond electroplated coating application by electroforming method
Sheiko, M. N.
Skok, V. N.
Pasichnyi, O. O.
JOURNAL OF SUPERHARD MATERIALS, 2016, 38 (01) : 47 - 50

← 1 →