Adjustment of CNC machine tool controller setting values by an experimental method

被引：25
|
作者：
Kwon, HD [1 ]
Burdekin, M [1 ]
机构：
[1] Korea Inst Ind Technol, Ind Automat Technol R&D Ctr, An Si 330820, South Korea
来源：
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE | 1998年 / 38卷 / 09期
关键词：
CNC machine tools; servo error;
D O I：
10.1016/S0890-6955(97)00058-8
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper presents an adjustment technique on controller setting values in CNC machine tools by measurement of servo induced feed drive errors. At high feed rate operations of CNC machine tools, servo induced errors are usually dominant and large compared with geometric errors. For measurement of the servo induced errors, an experimental equipment which incorporates two linear displacement sensors and a steel cube was developed, and servo feed drive errors were evaluated along a square corner test path. Based on evaluations of servo feed drive errors with different combination of parameters in machine control system, optimum setting parameters were found. The measuring equipment and optimisation method are described. (C) 1998 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码：1045 / 1065
页数：21
相关论文
共 50 条
  • [1] The intelligent operation and maintenance method and experimental research of CNC machine tool bearings
    Wang, Shuo
    Yu, Zhenliang
    Huo, Fengwei
    Lu, Changguo
    Wang, Jingbo
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2024,
  • [2] Adaptive fuzzy logic controller for feed drives of a CNC machine tool
    Jee, S
    Koren, Y
    MECHATRONICS, 2004, 14 (03) : 299 - 326
  • [3] CNC controller for a cutting machine
    Hace, A
    Jezernik, K
    2004 2ND IEEE INTERNATIONAL CONFERENCE ON INDUSTRIAL INFORMATICS: COLLABORATIVE AUTOMATION - ONE KEY FOR INTELLIGENT INDUSTRIAL ENVIRONMENTS, 2004, : 361 - 366
  • [4] Digital Twin modeling method for CNC machine tool
    Luo, Weichao
    Hu, Tianliang
    Zhu, Wendan
    Tao, Fei
    2018 IEEE 15TH INTERNATIONAL CONFERENCE ON NETWORKING, SENSING AND CONTROL (ICNSC), 2018,
  • [5] Research on modular division method of CNC machine tool
    Sheng, Zhongqi
    Zhu, Zongxiao
    Shi, Xiangdong
    Zhang, Chaobiao
    FRONTIERS OF MANUFACTURING SCIENCE AND MEASURING TECHNOLOGY II, PTS 1 AND 2, 2012, 503-504 : 78 - 81
  • [6] The Failure Rate Experimental Study of Special CNC Machine Tool
    He, Chunshan
    Pan, Liai
    Hu, Bing
    PROCEEDINGS OF THE 5TH INTERNATIONAL CONFERENCE ON ADVANCED DESIGN AND MANUFACTURING ENGINEERING, 2015, 39 : 1818 - 1823
  • [7] All digital high performance controller for spindle motor in CNC machine tool
    Kim, DI
    Yim, CH
    1997 IEEE INTERNATIONAL ELECTRIC MACHINES AND DRIVES CONFERENCE RECORD, 1997, : MC221 - MC223
  • [8] New method of adjustment two-loop controller setting
    Smetana, A.Z.
    Izvestiya Akademii Nauk. Energetika, 2002, (06): : 114 - 122
  • [9] A Prediction Method of Geometric Accuracy for Five-Axis CNC Machine Tools Considering Tool Setting Position
    Wu C.
    Zheng M.
    Wang Q.
    Fan J.
    Song X.
    Wang L.
    Gongcheng Kexue Yu Jishu/Advanced Engineering Sciences, 2022, 54 (04): : 173 - 186
  • [10] CNC machine tool work offset error compensation method
    Gu, Jie
    Agapiou, John S.
    Kurgin, Sheri
    JOURNAL OF MANUFACTURING SYSTEMS, 2015, 37 : 576 - 585
12345