Transient High Heat Load Performance of Atmospheric Plasma Sprayed Tungsten Coating

被引：2
|
作者：
Wang, Fan [1 ]
Huang, Jianjun [1 ]
机构：
[1] Shenzhen Univ, Coll Phys Sci & Technol, SZU CASIPP Joint Lab Appl Plasma, Room 303D, Shenzhen 518060, Peoples R China
来源：
JOURNAL OF FUSION ENERGY | 2016年 / 35卷 / 03期
关键词：
Plasma spray; Tungsten coating; Transient high heat load; High current pulsed electron beam; FABRICATION;
D O I：
10.1007/s10894-016-0078-x
中图分类号：
TL [原子能技术]; O571 [原子核物理学];
学科分类号：
0827 ; 082701 ;
摘要：
Tungsten coatings on oxygen-free copper substrates were fabricated by atmospheric plasma spraying (APS) technique. The properties of the microstructure, porosity, microhardness and oxidation of the coatings were characterized and measured. In order to evaluate the thermal properties of the APS-W coating, a high current pulsed electron beam facility was introduced to carry out the transient high heat load tests. Three power densities of 0.2, 0.5 and 1.0 GW/m(2) and total pulse duration of 5 ms were performed on the coating surfaces. The surface temperature and behavior of the APS-W coatings under the transient high heat load were investigated. Obvious melting and re-solidification were found on the treated APS-W coatings, and cracks were also observed on coating surface.
引用
收藏
页码：608 / 612
页数：5
相关论文
共 50 条
  • [1] Transient High Heat Load Performance of Atmospheric Plasma Sprayed Tungsten Coating
    Fan Wang
    Jianjun Huang
    Journal of Fusion Energy, 2016, 35 : 608 - 612
  • [2] Transient and steady state high heat load testing of atmospheric plasma sprayed tungsten
    Wang, Fan
    Luo, Guang-Nan
    Huang, Jianjun
    FUSION ENGINEERING AND DESIGN, 2020, 152
  • [3] Performance characterization and improvement of tungsten coating atmospheric plasma sprayed with submicron powder
    Wang, Fan
    Huang, Jianjun
    SURFACE & COATINGS TECHNOLOGY, 2014, 254 : 61 - 64
  • [4] Thermal response of plasma sprayed tungsten coating to high heat flux
    Liu, X
    Yang, L
    Tamura, S
    Tokunaga, K
    Yoshida, N
    Noda, N
    Xu, Z
    FUSION ENGINEERING AND DESIGN, 2004, 70 (04) : 341 - 349
  • [5] Properties improvement of atmospheric plasma sprayed tungsten coating by annealing
    Wang, Fan
    Luo, Guang-Nan
    Huang, Jianjun
    Liu, Ying
    SURFACE & COATINGS TECHNOLOGY, 2019, 358 : 276 - 281
  • [6] Thermal Performance and Microstructure of Vacuum Plasma Sprayed Tungsten Coatings under Cyclic Heat Load
    Zhu Xiaoyong
    Luo Laima
    Li Ping
    Chen Junling
    Luo Guangnan
    Wu Yucheng
    RARE METAL MATERIALS AND ENGINEERING, 2015, 44 (10) : 2405 - 2408
  • [7] Thermal performance and microstructure of vacuum plasma sprayed tungsten coatings under cyclic heat load
    Zhu, Xiaoyong
    Luo, Laima
    Li, Ping
    Chen, Junling
    Luo, Guangnan
    Wu, Yucheng
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2015, 44 (10): : 2405 - 2408
  • [8] Behavior of plasma-sprayed tungsten coatings on CFC and graphite under high heat load
    Tokunaga, K
    Yoshida, N
    Noda, N
    Kubota, Y
    Inagaki, S
    Sakamoto, R
    Sogabe, T
    Plöchl, L
    JOURNAL OF NUCLEAR MATERIALS, 1999, 266 : 1224 - 1229
  • [9] Behavior of plasma-sprayed tungsten coatings on CFC and graphite under high heat load
    Res. Institute for Applied Mechanics, Kyushu University, 6-1 Kasuga-koen, Kasuga shi, Fukuoka 816, Japan
    不详
    不详
    不详
    J Nucl Mater, (1224-1229):
  • [10] High heat flux properties of pure tungsten and plasma sprayed tungsten coatings
    Liu, X
    Tamura, S
    Tokunaga, K
    Yoshida, N
    Noda, N
    Yang, L
    Xu, Z
    JOURNAL OF NUCLEAR MATERIALS, 2004, 329 : 687 - 691
12345