Phase Sensitive Diffraction Sensor for High Sensitivity Refractive Index Measurement

In this study a diffraction based sensor has been developed for bio molecular sensing applications and performing assays in real time. A diffraction grating fabricated on a glass substrate produced diffraction patterns both in transmission and reflection when illuminated by a laser diode. We used zeroth order I-(0,I-0) as reference and first order I-(0,I-1) as signal channel and conducted ratiometric measurements that reduced noise by more than 50 times. The ratiometric approach resulted in a very simple instrumentation with very high sensitivity. In the past, we have shown refractive index measurements both for bulk and surface adsorption using the diffractive self-referencing approach In the current work we extend the same concept to higher diffraction orders. We have considered order I-(0,I-1) and I-(1,I-1) and performed ratiometric measurements I-(0,I-1)/I-(1,I-1) to eliminate the common mode fluctuations. Since orders I((0,1) )and I-(1,I-1) behaved opposite to each other, the resulting ratio signal amplitude increased more than twice compared to our previous results. As a proof of concept we used different salt concentrations in DI water. Increased signal amplitude and improved fluid injection system resulted in more than 4 times improvement in detection limit, giving limit of detection 1.3x10(-7) refractive index unit (RIU) compared to our previous results. The improved refractive index sensitivity will help significantly for high sensitivity label free bio sensing application in a very cost-effective and simple experimental set-up.