Synthesis and processing of SOFC components for the fabrication and characterization of anode supported cells

In this article, it is intended to evaluate the performances of previously synthesized different nanometric compounds as SOFC components under real conditions. For this purpose, anodic supports SOFCs have been manufactured in different configurations. The compounds NiO-(Y2O3)(0.08)(ZrO2)(0.92) (NiO-YSZ), (Y2O3)(0.08)(ZrO2)(0.92) (YSZ), Sm0.2Ce0.8O1.9 (SDC), La0.6Sr0.4FeO3 (LSF) and LaNi0.6Fe0.4O3 (LNF) were used as anode support, electrolyte, barrier, cathode and contact layer, respectively. To obtain the cells, the anode supports were produced by uniaxial pressing and the remaining layers were added using the airbrush technique, assembling them by different sintering processes. The cells developed have been electrochemically tested in a temperature range between 750 and 865 ?. Additionally, degra-dation tests have been carried out under constant current. Moreover, to characterize the microstructure of the cells, a scanning electron microscope (SEM) equipped with an energy dispersive X-ray spectroscopy (EDX) analyzer has been used. The results obtained show that the incorporation of cathode and contact layers increases the power densities and decreases the total resistances of the cells with respect to the cell without cathode, especially with the addition of the LNF contact layer. Despite the improve-ment obtained, more tests have to be carried out in order to optimize the performance of SOFC devices in degradation tests.(c) 2020 SECV. Published by Elsevier Espana, S.L.U.