HYDROGEN DIFFUSION ANALYSIS IN THE FATIGUE CRACK GROWTH TEST UNDER HIGH PRESSURE HYDROGEN

被引:0
|
作者
Ishikawa, Nobuyuki [1 ]
Ohmi, Toshihito [2 ]
Yokobori, A. Toshimitsu [2 ]
机构
[1] JFE Steel Corp, Steel Res Lab, Fukuyama, Hiroshima, Japan
[2] Tohoku Univ, Grad Sch Engn, Sendai, Miyagi, Japan
关键词
NUMERICAL-ANALYSIS; STRENGTH; FRACTURE; STEELS; TIP;
D O I
暂无
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Prevention of hydrogen embrittlement is one of the most important issues for the materials used in hydrogen environment. Various mechanisms for hydrogen embrittlement were proposed, such as the decohesion mechanism and hydrogen enhanced localized plasticity. However, the process of hydrogen diffusion and accumulation into the fracture point is necessary for understanding of hydrogen embrittlement. In this paper, hydrogen embrittlement behavior during the fatigue crack extension test under high pressure hydrogen was first conducted. Then, hydrogen diffusion and accumulation behavior in the crack tip region was analyzed by the numerical simulation based on the Fick's diffusion theory. Alpha multiplication method which multiplies stress gradient induced terms was found to. be valid to realize correct particle diffusion behaviors driven by the stress gradient term. The significance of the concept of alpha multiplication method for the numerical analysis was discussed by comparing to the experimental hydrogen embrittlement behavior.
引用
收藏
页数:6
相关论文
共 50 条
  • [1] Fatigue crack initiation and growth in a CrMo steel under hydrogen pressure
    Briottet, L.
    Moro, I.
    Escot, M.
    Furtado, J.
    Bortot, P.
    Tamponi, G. M.
    Solin, J.
    Odemer, G.
    Blanc, C.
    Andrieu, E.
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2015, 40 (47) : 17021 - 17030
  • [2] Effect of hydrogen pressure and test frequency on fatigue crack growth of a ferrite-pearlite steel in hydrogen gas
    Yoshikawa M.
    Tsutsumi N.
    Matsuoka S.
    Murakami Y.
    Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 2010, 76 (767): : 908 - 917
  • [3] Fatigue crack growth modeling of pipeline steels in high pressure gaseous hydrogen
    Amaro, Robert L.
    Drexler, Elizabeth S.
    Slifka, Andrew J.
    INTERNATIONAL JOURNAL OF FATIGUE, 2014, 62 : 249 - 257
  • [4] Fatigue Crack Growth Behaviour of High Strength Ferritic Steels in High Pressure Hydrogen
    Saxenal, Ashok
    Nibur, Kevin
    12TH INTERNATIONAL FATIGUE CONGRESS (FATIGUE 2018), 2018, 165
  • [5] Effects of hydrogen pressure, test frequency and test temperature on fatigue crack growth properties of low-carbon steel in gaseous hydrogen
    Yamabe, Junichiro
    Yoshikawa, Michio
    Matsunaga, Hisao
    Matsuoka, Saburo
    21ST EUROPEAN CONFERENCE ON FRACTURE, (ECF21), 2016, 2 : 525 - 532
  • [6] Fatigue test of carbon epoxy composite high pressure hydrogen storage vessel under hydrogen environment
    Chuan-xiang ZHENG
    Liang WANG
    Rong LI
    Zong-xin WEI
    Wei-wei ZHOU
    Journal of Zhejiang University-Science A(Applied Physics & Engineering), 2013, (06) : 393 - 400
  • [7] Fatigue test of carbon epoxy composite high pressure hydrogen storage vessel under hydrogen environment
    Zheng, Chuan-xiang
    Wang, Liang
    Li, Rong
    Wei, Zong-xin
    Zhou, Wei-wei
    JOURNAL OF ZHEJIANG UNIVERSITY-SCIENCE A, 2013, 14 (06): : 393 - 400
  • [8] Fatigue test of carbon epoxy composite high pressure hydrogen storage vessel under hydrogen environment
    Chuan-xiang ZHENG
    Liang WANG
    Rong LI
    Zong-xin WEI
    Wei-wei ZHOU
    Journal of Zhejiang University-Science A(Applied Physics & Engineering), 2013, 14 (06) : 393 - 400
  • [9] Fatigue test of carbon epoxy composite high pressure hydrogen storage vessel under hydrogen environment
    Chuan-xiang Zheng
    Liang Wang
    Rong Li
    Zong-xin Wei
    Wei-wei Zhou
    Journal of Zhejiang University SCIENCE A, 2013, 14 : 393 - 400
  • [10] CRACK GROWTH ANALYSIS OF HIGH-PRESSURE EQUIPMENT FOR HYDROGEN STORAGE
    Li, Z. Y.
    Zhou, C. L.
    Zhao, Y. Z.
    Hua, Z. L.
    Zhang, L.
    Wen, M.
    Xu, P.
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2013, VOL 1B: CODES AND STANDARDS, 2014,