THERMAL EVALUATION FOR A ULTRA HIGH TEMPERATURE REACTOR WITH PEBBLE TYPE FUELS

被引：0

作者：

Fumizawa, Motoo ^{[1
]}

Kosuge, Yuta ^{[1
]}

Hortuchi, Hidenori ^{[1
]}

机构：

[1] SIT, MSE Dept, Fujisawa, Kanagawa 2518511, Japan

来源：

ICONE 17: PROCEEDINGS OF THE 17TH INTERNATIONAL CONFERENCE ON NUCLEAR ENGINEERING, VOL 1 | 2009年

关键词：

D O I：

暂无

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

This study presents a predictive thermal-hydraulic analysis with packed spheres in a nuclear gas-cooled reactor core. The predictive analysis considering the effects of high power density and the some porosity value were applied as a design condition for an Ultra High Temperature Reactor (UHTR). The thermal-hydraulic computer code was developed and identified as PEBTEMP. The highest outlet coolant temperature of 1316 was achieved in the case of an UHTREX at LASL. which was a small scale UHTR using hollow-rod as a fuel element In the present study, the fuel was changed to a pebble type, a porous media Several calculation based on HTGR-GT300 through GT600 were 4 8 w/cm(3) through 9 6 w/cm(3) respectively. As a result, the relation between the fuel temperature and the power density was obtained under the different system pressure and coolant outlet temperature. Finally, available design conditions are selected

引用

页码：865 / 872

页数：8

共 50 条

[1] Thermal hydraulics and thermal radiation for ultra high temperature gas-cooled nuclear reactor with pebble type fuel
Fumizawa, Motoo
HT2005: Proceedings of the ASME Summer Heat Transfer Conference 2005, Vol 4, 2005, : 79 - 85
[2] Pebble bed high temperature reactor
Bindon, F.John L.
Nuclear Engineer, 1988, 29 (06): : 194 - 197
[3] Improvement on Effective Thermal Conductivity Model of High Temperature Pebble Bed Reactor
Chen B.
Bu S.
Chen D.
Ma Z.
Zhang L.
Yuanzineng Kexue Jishu/Atomic Energy Science and Technology, 2021, 55 (11): : 1998 - 2004
[4] CFD ASSESSMENT OF THE LOCAL HOT CORE TEMPERATURE IN A PEBBLE-BED TYPE VERY HIGH TEMPERATURE REACTOR
Kim, Min-Hwan
Lim, Hong-Sik
Lee, Won Jae
ICONE16: PROCEEDING OF THE 16TH INTERNATIONAL CONFERENCE ON NUCLEAR ENGINEERING - 2008, VOL 2, 2008, : 281 - 287
[5] NONPROLIFERATION ISSUE OF THE PEBBLE BED HIGH-TEMPERATURE REACTOR
TEUCHERT, E
HAAS, KA
NUCLEAR TECHNOLOGY, 1986, 72 (02) : 218 - 222
[6] A review of pebble flow study for pebble bed high temperature gas-cooled reactor
Jiang, Shengyao
Tu, Jiyuan
Yang, Xingtuan
Gui, Nan
EXPERIMENTAL AND COMPUTATIONAL MULTIPHASE FLOW, 2019, 1 (03) : 159 - 176
[7] A review of pebble flow study for pebble bed high temperature gas-cooled reactor
Shengyao Jiang
Jiyuan Tu
Xingtuan Yang
Nan Gui
Experimental and Computational Multiphase Flow, 2019, 1 : 159 - 176
[8] Temperature measurement system design for effective thermal conductivity of pebble bed reactor
Li, Rui
Ren, Cheng
Li, Cong-Xin
Sun, Yan-Fei
Liu, Zhi-Yong
Yang, Xing-Tuan
Yuanzineng Kexue Jishu/Atomic Energy Science and Technology, 2015, 49 : 305 - 311
[9] Analysis of impact of mixing flow on the pebble bed high temperature reactor
Hao, C., 1600, Atomic Energy Press (35):
[10] CONCEPTUAL DESIGN FOR A HIGH TEMPERATURE PEBBLE BED REACTOR OF 1200 MWE
KERSTING, W
NUCLEAR ENGINEERING AND DESIGN, 1968, 7 (04) : 345 - &

← 1 2 3 4 5 →