THE ELECTRO-DISCHARGE COMPACTION OF POWDER TUNGSTEN CARBIDE - COBALT - DIAMOND COMPOSITE MATERIAL

被引：0
|
作者：
Grigoryev, Evgeny G.
Rosliakov, Alexander V.
机构：
来源：
ADVANCES IN SINTERING SCIENCE AND TECHNOLOGY | 2010年 / 209卷
关键词：
SINTERING METHOD;
D O I：
暂无
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The manufacturing of high strength structure of powder tungsten carbide - cobalt - diamond composite material is investigated and optimal operating parameters are defined. The structure of tungsten carbide - cobalt - diamond composite material reaches top strength at certain magnitudes of applied pressure and high voltage electrical discharge parameters. We studied densification process of powder material during electro-discharge compaction by means of high-velocity filming. Pulse current parameters were measured by Rogovsky coil. The temperature evolution during electro-discharge compaction process was measured by means of thermocouple method. We have installed that the powder densification process has wave nature in electro-discharge compaction. We defined wave front velocity of densification process and pressure amplitude in wave front subject to parameters of electro-discharge compaction.
引用
收藏
页码：205 / 209
页数：5
相关论文
共 50 条
  • [1] Modelling and optimisation of electro-discharge diamond face grinding of cemented carbide-cobalt composite
    Yadava, V. (vinody@mnnit.ac.in), 2012, Inderscience Enterprises Ltd. (12)
  • [2] Composite titanium dental implant fabricated by electro-discharge compaction
    Qiu, J
    Dominici, JT
    Lifland, MI
    Okazaki, K
    BIOMATERIALS, 1997, 18 (02) : 153 - 160
  • [3] Soft computing models based prediction of cutting speed and surface roughness in wire electro-discharge machining of tungsten carbide cobalt composite
    Probir Saha
    Abhijit Singha
    Surjya K. Pal
    Partha Saha
    The International Journal of Advanced Manufacturing Technology, 2008, 39 : 74 - 84
  • [4] Statistical modeling and optimization of process parameters in electro-discharge machining of cobalt-bonded tungsten carbide composite (WC/6%Co)
    Assarzadeh, S.
    Ghoreishi, M.
    PROCEEDINGS OF THE SEVENTEENTH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (ISEM), 2013, 6 : 463 - 468
  • [5] Soft computing models based prediction of cutting speed and surface roughness in wire electro-discharge machining of tungsten carbide cobalt composite
    Saha, Probir
    Singha, Abhijit
    Pal, Surjya K.
    Saha, Partha
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2008, 39 (1-2): : 74 - 84
  • [6] Analysis of die compaction of tungsten carbide and cobalt powder mixtures
    Roure, S
    Bouvard, D
    Dorémus, P
    Pavier, E
    POWDER METALLURGY, 1999, 42 (02) : 164 - 170
  • [7] The influence of dielectric media on nano-structured tungsten carbide (WC) powder synthesized by electro-discharge process
    Shabgard, Mohammad Reza
    Najafabadi, Amir Forouzan
    ADVANCED POWDER TECHNOLOGY, 2014, 25 (03) : 937 - 945
  • [8] Electro discharge compaction of WC-Co composite material containing particles of diamond
    Grigoriev, Eugene
    Rosliakov, Alexander
    PROGRESS IN POWDER METALLURGY, PTS 1 AND 2, 2007, 534-536 : 1181 - +
  • [9] Microstructural Characterization of Wire Electro Discharge Machined Tungsten Carbide Cobalt Metal Matrix Composite
    Muthuraman, V.
    Ramakrishnan, R.
    MANUFACTURING SCIENCE AND TECHNOLOGY, PTS 1-8, 2012, 383-390 : 3223 - +
  • [10] The diamond-tungsten carbide polycrystalline composite material
    S. N. Nazarchuk
    A. A. Bochechka
    V. S. Gavrilova
    L. A. Romanko
    N. N. Belyavina
    L. I. Aleksandrova
    V. N. Tkach
    E. F. Kuz’menko
    S. D. Zabolotnyi
    Journal of Superhard Materials, 2011, 33 : 1 - 12
12345