Development of a measuring system for on-line in situ monitoring of composite materials manufacturing

被引：9

作者：

Polansky, R. ^{[1
]}

Pihera, J. ^{[1
]}

Komarek, J. ^{[2
]}

Pavlica, R. ^{[3
]}

Prosr, P. ^{[1
]}

Freisleben, J. ^{[1
]}

Vik, R. ^{[1
]}

Hromadka, K. ^{[1
]}

Blecha, T. ^{[1
]}

Cengery, J. ^{[1
]}

Soukup, R. ^{[1
]}

Cermak, M. ^{[1
]}

Zemanova, M. ^{[1
]}

Kadlec, P. ^{[1
]}

Hamacek, A. ^{[1
]}

机构：

[1] Univ West Bohemia, Fac Elect Engn, Reg Innovat Ctr Elect Engn, Univ 8, Plzen 30614, Czech Republic

[2] Technofiber Sro, Lazaretni 7, Brno 61500, Czech Republic

[3] 5M Sro, Na Zahonech 1177, Kunovice 68604, Czech Republic

来源：

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING | 2016年 / 90卷

关键词：

Polymer-matrix composites (PMCs); Cure behavior; Process monitoring; Braiding; EPOXY-RESIN; DIELECTRIC ANALYSIS; NONISOTHERMAL CURE; DEVITRIFICATION; VITRIFICATION; MECHANISMS; KINETICS;

D O I：

10.1016/j.compositesa.2016.09.006

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A unique portable measuring system using an impedance spectroscopy method with a self-adapting frequency of measurement is introduced. The system is intended for the on-line in situ monitoring of composite materials curing under industrial conditions. The capabilities of the developed system are demonstrated through the results obtained from on-line in situ measurements of unreinforced thermosetting resin, as well as of composites under real manufacturing conditions. Observations are supported by the results of other established methods for determining the degree of curing: temperature modulated differential scanning calorimetry (MDSC), Fourier transform infrared spectroscopy (FT-IR) and broadband dielectric spectroscopy (BDS). Compressive and bending tests were also carried out on manufactured composites removed at different stages of the post-curing phase. Due to the self adapting frequency, the system has enhanced sensitivity in the post-cure phase when the diffusion controlled reactions proceed and, therefore, is suitable also for the analysis of hard post-cure samples. (C) 2016 Elsevier Ltd. All rights reserved.

引用

页码：760 / 770

页数：11

共 50 条

[1] DEVELOPMENT OF AN ON-LINE MANUFACTURING SYSTEM
MEYER, HW
JENSEN, M
ISA TRANSACTIONS, 1971, 10 (02) : 159 - &
[2] DEVELOPMENT OF AN ON-LINE MEASURING AND MONITORING SYSTEM FOR FOULING BASED ON DELPHI
Wang Yuanyuan
Wang Jianguo
FOURTH INTERNATIONAL SEMINAR ON MODERN CUTTING AND MEASUREMENT ENGINEERING, 2011, 7997
[3] Software design of insulation on-line monitoring and measuring system
Guan, G.Z.
Guo, W.
Zhao, S.C.
Zhongguo Dianli/Electric Power, 2001, 34 (10):
[4] Development of an on-line integrated condition monitoring system
Kinnaird, I
Orpin, P
CONDITION MONITORING 2001, PROCEEDINGS, 2001, : 267 - 278
[5] The development of the on-line rotor vibration monitoring system
He, Wenhao
Zhou, Shaoping
TRANSFERABILITY AND APPLICABILITY OF CURRENT MECHANICS APPROACHES, 2009, : 529 - 533
[6] Development of an On-line Monitoring System for Mental Corrosion
Sun Lingfang
Li Jing
Zhang Shujuan
2008 10TH INTERNATIONAL CONFERENCE ON CONTROL AUTOMATION ROBOTICS & VISION: ICARV 2008, VOLS 1-4, 2008, : 1934 - 1937
[7] Development of On-line Laser Power Monitoring System
Ding, Chien-Fang
Lee, Meng-Shiou
Li, Kuan-Ming
REAL-TIME MEASUREMENTS, ROGUE EVENTS, AND EMERGING APPLICATIONS, 2016, 9732
[8] Development of On-line Monitoring System for Automation Equipment
Wang, Xiaowei
Yang, Libo
Hu, Wenping
Wang, Yajun
Hu, Cong
Li Xuanyi
2018 CHINA INTERNATIONAL CONFERENCE ON ELECTRICITY DISTRIBUTION (CICED), 2018, : 1068 - 1073
[9] Development of on-line monitoring and diagnosing system for dredger
Li, YJ
Yang, JG
ICEMI 2005: CONFERENCE PROCEEDINGS OF THE SEVENTH INTERNATIONAL CONFERENCE ON ELECTRONIC MEASUREMENT & INSTRUMENTS, VOL 8, 2005, : 369 - 375
[10] Operational support system for on-line faults monitoring in chemical manufacturing
Chen, BH
Shang, ZG
Yang, SH
Wang, XZ
McGreavy, C
(SAFEPROCESS'97): FAULT DETECTION, SUPERVISION AND SAFETY FOR TECHNICAL PROCESSES 1997, VOLS 1-3, 1998, : 919 - 924

← 1 2 3 4 5 →