Microstructure changes of plasma spraying tungsten coatings on CFC after different temperature annealing

被引：2
|
作者：
Liu, X [1 ]
Tamura, S [1 ]
Tokunaga, K [1 ]
Yoshida, N [1 ]
Noda, N [1 ]
机构：
[1] SW Inst Phys, Chengdu 610041, Sichuan, Peoples R China
来源：
MATERIALS FOR ADVANCED ENERGY SYSTEMS AND FISSION AND FUSION ENGINEERING, PROCEEDINGS | 2003年
关键词：
annealing; VPS-W; diffusion barrier; recrystallization; tungsten carbide;
D O I：
10.1142/9789812705198_0020
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Thermal behaviors of tungsten coating of 0.5 mm thick with multi-layers interface of tungsten (W) and rhenium (Re) coated on CFC (CX-2002U) substrate by vacuum plasma spraying (VPS) technique were examined by annealing with an electron beam thermal load facility between 1200 degreesC and 2000 degreesC. Change of the microstructure was observed and its chemical composition was analyzed by EDS after annealing. It was observed that remarkable recrystallization of VPS-W occurred above 1400 degreesC. The structure of the multi-layers of W and Re become obscure by the mutual diffusion of W, Re and C above 1600degreesC and finally disappeared after annealing at 2000 degreesC for one hour. Very hard tungsten carbides are formed at the interface above 1600 degreesC and they were broadening with increasing annealing temperature and time.
引用
收藏
页码：179 / 186
页数：8
相关论文
共 50 条
  • [1] Microstructure and thermal property of tungsten coatings prepared by vacuum plasma spraying technology
    Niu, Yaran
    Zheng, Xuebin
    Ji, Heng
    Qi, Lingjun
    Ding, Chuanxian
    Chen, Junling
    Luo, Guangnan
    FUSION ENGINEERING AND DESIGN, 2010, 85 (7-9) : 1521 - 1526
  • [2] Tungsten coating by ATC plasma spraying on CFC for WEST tokamak
    Firdaouss, M.
    Desgranges, C.
    Hernandez, C.
    Mateus, C.
    Maier, H.
    Boeswirth, B.
    Greuner, H.
    Samaille, F.
    Bucalossi, J.
    Missirlian, M.
    PHYSICA SCRIPTA, 2017, T170
  • [3] A study on vacuum plasma spraying tungsten coatings
    Yi, Zeng
    Zheng, Xuebin
    Heng, Ji
    Wei, Wu
    Lee, Soowohn
    ECO-MATERIALS PROCESSING AND DESIGN VIII, 2007, 544-545 : 849 - +
  • [4] Mechanical properties of tungsten/copper coatings produced by plasma spraying
    Itoh, K
    Andoh, H
    Suyama, S
    Shindoh, T
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2001, 65 (10) : 929 - 934
  • [5] Formation of tungsten coatings by gas tunnel type plasma spraying
    Kobayashi, A
    Sharafat, S
    Ghoniem, NM
    SURFACE & COATINGS TECHNOLOGY, 2006, 200 (14-15): : 4630 - 4635
  • [6] Modeling and characterization of residual stresses and microstructure in thermal barrier coatings after plasma spraying
    Persson, C
    Bengtsson, P
    Wigren, J
    Greving, D
    THERMAL SPRAY: PRACTICAL SOLUTIONS FOR ENGINEERING PROBLEMS, 1996, : 941 - 946
  • [7] Plasma Sprayed Hydroxyapatite Coatings: Influence of Spraying Power on Microstructure
    Mohd, S. M.
    Abd, M. Z.
    Abd, A. N.
    INTERNATIONAL CONFERENCE ON ADVANCEMENT OF MATERIALS AND NANOTECHNOLOGY 2007, 2010, 1217 : 539 - 545
  • [8] PLASMA SPRAYING OF TITANIUM ALUMINIDE COATINGS - PROCESS PARAMETERS AND MICROSTRUCTURE
    KHOR, KA
    MURAKOSHI, Y
    TAKAHASHI, M
    SANO, T
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1995, 48 (1-4) : 413 - 419
  • [9] Properties of Tungsten Coatings Deposited on Graphite by Vacuum Plasma Spraying Method
    Lim, Hyeon Mi
    Kang, Bo Ram
    Kim, Ho Seok
    Hong, Bong Guen
    JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2017, 17 (11) : 8539 - 8544
  • [10] Thermal and electrical properties of tungsten/copper coatings produced by plasma spraying
    Itoh, Y
    Andoh, H
    Suyama, S
    Shindoh, T
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2001, 65 (12) : 1108 - 1112
12345