Improved Adsorption of Tetracycline in Water by a Modified Caulis spatholobi Residue Biochar

A potassium modified biochar (KBC) using Caulis spatholobi residue as the raw material was prepared by adopting a two-step method of pyrolysis followed by high-temperature potassium hydroxide activation, and its properties were characterized. Activation using potassium hydroxide under high temperature induced the loss of CaCO3 and partial C on biochar, which created a high specific surface area (1336.31 m(2)/g) together with a developed pore structure. pH displayed a slight influence on tetracycline adsorption, which signified the slight influence of the existence of tetracycline and the charge potential of biochar. Besides, pore filling, hydrogen bonding and pi-pi EDA stacking interactions possibly resulted in tetracycline adsorption on biochar. Tetracycline adsorption was fast in the original period, followed by a slower rate of adsorption until equilibrium was reached. Adsorption kinetics of tetracydine could be described using secondary and Elovids kinetic models. Adsorption isotherms for tetracycline were well fitted to the Langmuir isotherm model, and the maximum adsorption capacity of KBC was 830.78 mg/g at 318 K. According to a study of the thermodynamics, the adsorption of tetracycline on KBC was an endothermic reaction process. Corresponding results in the present study demonstrated that high-temperature potassium hydroxide activation enabled biochar to effectively eliminate tetracycline from water and wastewater.