Experimental Study of Critical Quality in Vertical Narrow Annular Channels

被引:0
|
作者
Su, Shunyu [1 ]
Huang, Suyi [2 ]
Chen, Jian [1 ]
机构
[1] Wuhan Univ Sci & Technol, Coll Urban Construct, 15 Mail Box,199 Xiongchu Ave, Wuhan 430070, Hubei, Peoples R China
[2] Huazhong Univ Sci & Technol, Sch Energy & Power Engn, Wuhan 430074, Peoples R China
关键词
Critical quality; Dryout; Flow boiling; Narrow annular channel; CRITICAL HEAT-FLUX; SMALL-DIAMETER TUBES; PRESSURE-DROP; FLOW; WATER; MICROCHANNEL; PREDICTION;
D O I
10.4028/www.scientific.net/AMR.226-228.209
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
Flow boiling heat transfer in vertical narrow annular channels with dual tube heating has been experimentally investigated using distilled water as the working fluid. The experiments were made on two types of test section within the experimental range: heat flux, 40-210 kW/m(2); mass flux, 45-180 kg/m(2)s; system pressure, 2-3.5MPa; gap size, 2mm and 3mm. The intention of this paper is to experimentally survey the flow boiling dryout mechanism of liquid film on the tube wall of vertical narrow annular channels with heated length of 1300mm. The values of dryout temperature, while the heating rate reaches critical heat flux, could be measured in the experiments. And the values of the critical quality x were calculated by thermodynamic equilibrium. The main factors which have influence on critical quality, such as mass flux, dimension of the narrow channel, heat flux and water inlet temperature were analyzed based on the experimental data. The empirical correlation which used to calculate critical quality in vertical narrow annular channels in similar conditions was given here. The calculation results of this correlation were compared with experimental data and agreed well with it while the deviation is less than +/- 15%.
引用
收藏
页码:209 / +
页数:2
相关论文
共 50 条
  • [1] Experimental investigation of flow boiling heat transfer in vertical narrow annular channels
    Su, SY
    Huang, SY
    Wang, XM
    PROCEEDINGS OF THE 3RD INTERNATIONAL SYMPOSIUM ON HEAT TRANSFER ENHANCEMENT AND ENERGY CONSERVATION, VOLS 1 AND 2, 2004, : 123 - 128
  • [2] Experimental Study of Flooding in Vertical Narrow Rectangular channels
    Li, X. C.
    Sun, Z. N.
    6TH INTERNATIONAL SYMPOSIUM ON MULTIPHASE FLOW, HEAT MASS TRANSFER AND ENERGY CONVERSION, 2010, 1207 : 471 - 475
  • [3] THEORETICAL CALCULATION OF THE CRITICAL HEAT FLUX IN ANNULAR UPWARD FLOW IN VERTICAL NARROW RECTANGULAR CHANNELS
    Du, Dongxiao
    Su, Guanghui
    Qiu, Suizheng
    ICONE17, VOL 4, 2009, : 311 - 319
  • [4] Theoretical study on the characteristics of critical heat flux in vertical narrow rectangular channels
    Du, D. X.
    Tian, W. X.
    Su, G. H.
    Qiu, S. Z.
    Huang, Y. P.
    Yan, X.
    APPLIED THERMAL ENGINEERING, 2012, 36 : 21 - 31
  • [5] EXPERIMENTAL STUDY ON MEASUREMENT OF ANNULAR FLOW FILM THICKNESS IN VERTICAL NARROW RECTANGULAR CHANNEL
    Liu, Antai
    Gu, Haifeng
    Zhu, Fuqiang
    Yan, Changqi
    PROCEEDINGS OF 2021 28TH INTERNATIONAL CONFERENCE ON NUCLEAR ENGINEERING (ICONE28), VOL 4, 2021,
  • [6] Experimental research on dryout point of downstream in narrow annular channels
    Wang, XM
    Yang, JG
    Huang, SY
    Quyang, HH
    Wang, XY
    Chen, HP
    ENERGY CONVERSION AND APPLICATION, VOL I AND II, 2001, : 597 - 600
  • [7] CRITICAL REGIMES OF UPWARD FILM FLOWS IN VERTICAL ANNULAR CHANNELS
    BEZRODNYJ, MK
    ANTOSHKO, YV
    EXPERIMENTAL THERMAL AND FLUID SCIENCE, 1992, 5 (04) : 448 - 456
  • [8] Cutting narrow annular channels
    Ivanov V.V.
    Belogorlov S.V.
    Russian Engineering Research, 2010, 30 (7) : 731 - 733
  • [9] Effect of surfactant concentration on saturated flow boiling in vertical narrow annular channels
    Hetsroni, G.
    Gurevich, M.
    Mosyak, A.
    Rozenblit, R.
    INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 2007, 33 (11) : 1141 - 1152
  • [10] Experimental Study on Convective Boiling Heat Transfer in Vertical Narrow-Gap Annular Tube
    Li Bin He Anding Wang Yueshe Zhou Fangde The National Laboratory of Multiphase Flow in Power Engineering
    JournalofThermalScience, 2001, (02) : 148 - 152