Correlation between SiOx content and properties of DLC:SiOx films prepared by PECVD

被引:38
|
作者
Zajícková, L
Bursíková, V
Perina, V
Macková, A
Janca, J
机构
[1] Masaryk Univ, Dept Phys Elect, CS-61137 Brno, Czech Republic
[2] Acad Sci Czech Republ, Inst Nucl Phys, Prague, Czech Republic
来源
关键词
PECVD; Vickers hardness test; Rutherford backscattering spectroscopy; diamond-like carbon; silicon;
D O I
10.1016/S0257-8972(03)00681-9
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Hard diamond-like carbon (DLC) films with an addition of SiOx were deposited in capacitively coupled r.f. discharges from a mixture of methane and hexamethyldisiloxane (HMDSO). The flow rate of HMDSO was changed in order to vary the SiOx content in the films. Complete atomic composition of the films was determined by Rutherford backscattering spectroscopy combined with elastic recoil detection analysis. The thickness and the optical properties were obtained from the ellipsometric measurements. The mechanical properties were studied by a depth sensing indentation technique using Fischerscope H100 tester. The O/Si ratio in DLC:SiOx films was 0.286 +/- 0.008 and the content of SiOx increased with the HMDSO-to-methane flow rate ratio q. The DLC:SiOx films were close to DLC films as concerning the optical properties in the UV/visible and the high hardness if q was maximum 0.25. However, the compressive stress in the films was reduced, the film fracture toughness was improved and the deposition rate increased. (C) 2003 Elsevier Science B.V. All rights reserved.
引用
收藏
页码:281 / 285
页数:5
相关论文
共 50 条
  • [1] Microstructure and tribological properties of SiOx/DLC films grown by PECVD
    Yang, WJ
    Sekino, T
    Shim, KB
    Niihara, K
    Auh, KH
    SURFACE & COATINGS TECHNOLOGY, 2005, 194 (01): : 128 - 135
  • [2] A comparison of structures and properties of SiNx and SiOx films prepared by PECVD
    Xu, Xiangdong
    Zhang, Liangchang
    Huang, Long
    He, Qiong
    Fan, Taijun
    Yang, Zhuo
    Jiang, Yadong
    Li, Zhanping
    JOURNAL OF NON-CRYSTALLINE SOLIDS, 2012, 358 (01) : 99 - 106
  • [3] Optical properties of the undoped and SiOx doped DLC films
    Meskinis, Sarunas
    Kopustinskas, Vitoldas
    Slapikas, Kestutis
    Gudaitis, Rimas
    Tamulevicius, Sigitas
    Niaura, Gediminas
    Rinnerbauer, Veronika
    Hingerl, Kurt
    ADVANCED OPTICAL MATERIALS, TECHNOLOGIES, AND DEVICES, 2007, 6596
  • [4] Barrier and mechanical properties of carbon steel coated with SiOx/SiOxCyHz, gradual films prepared by PECVD
    Rangel, Rita C. C.
    Cruz, Nilson C.
    Milella, Antonella
    Fracassi, Francesco
    Rangel, Elidiane C.
    SURFACE & COATINGS TECHNOLOGY, 2019, 378
  • [5] INVESTIGATION OF THE OPTICAL AND WETTING PROPERTIES OF SiOx DOPED DLC FILMS
    Ciuciulkaite, Agne
    Tamuleviciene, Asta
    Kopustinskas, Vitoldas
    Meskinis, Sarunas
    Tamulevicius, Sigitas
    RADIATION INTERACTION WITH MATERIAL AND ITS USE IN TECHNOLOGIES 2012, 2012, : 403 - 406
  • [6] Dielectric Properties of the Ion Beam Deposited SiOx Doped DLC Films
    Meskinis, Sarunas
    Gudaitis, Rimas
    Tamulevicius, Sigitas
    Kopustinskas, Vitoldas
    Andrulevicius, Mindaugas
    MATERIALS SCIENCE-MEDZIAGOTYRA, 2009, 15 (01): : 3 - 6
  • [7] Effects of SiOx-incorporation hydrocarbons on the tribological properties of DLC films
    Chen, LY
    Hong, FCN
    DIAMOND AND RELATED MATERIALS, 2001, 10 (3-7) : 1058 - 1062
  • [8] Hydrophobic properties of the ion beam deposited DLC films containing SiOx
    Meskinis, S.
    Tamulevicius, S.
    Kopustinskas, V.
    Andrulevicius, A.
    Guobiene, A.
    Guldaitis, R.
    Liutviniene, I.
    THIN SOLID FILMS, 2007, 515 (19) : 7615 - 7618
  • [9] Growth and properties of the ion beam deposited SiOx containing DLC films
    Meskinis, S.
    Andrulevicius, M.
    Slapikas, K.
    Iljinas, A.
    Gudaitis, R.
    Puiso, J.
    Tamulevicius, S.
    VACUUM, 2009, 83 : S121 - S123
  • [10] Structural modifications of SiOx/DLC films by thermal annealing
    Yang, WJ
    Niihara, K
    Auh, KH
    JOURNAL OF CERAMIC PROCESSING RESEARCH, 2004, 5 (03): : 269 - 273