EFFECT OF INTERNAL HYDROGEN ON FATIGUE STRENGTH OF TYPE 316 STAINLESS STEEL

被引：0
|
作者：
Skipper, C. [1 ]
Leisk, G. [1 ]
Saigal, A. [1 ]
Matson, D. [1 ]
San Marchi, C. [2 ]
机构：
[1] Tufts Univ, Dept Mech Engn, Medford, MA 02155 USA
[2] Sandia Natl Labs, Livermore, CA USA
来源：
EFFECTS OF HYDROGEN ON MATERIALS | 2009年
基金：
美国能源部;
关键词：
GAS EMBRITTLEMENT;
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The effects of hydrogen embrittlement has been extensively researched, however, relatively little research has been devoted to the effects of internal hydrogen on the fatigue strength of structural metals. This paper examines the effect of internal hydrogen on the fatigue strength of strain-hardened type 316 stainless steel in rotating beam fatigue tests. The tensile properties and high cycle fatigue life of two type 316 stainless steel alloys were studied using thermal precharging to approximate high-pressure hydrogen exposure for long times. Tensile testing was found to be consistent with previous studies using the identical environmental condition. Hydrogen precharging increased the number of cycles to failure by 5 to 10 times compared to non-charged specimens. The basic shape of the S-N curve and the apparent fatigue limit were essentially unchanged by thermal precharging with hydrogen.
引用
收藏
页码：139 / +
页数：3
相关论文
共 50 条
  • [1] Effect of mean stress on fatigue strength of Type 316 stainless steel
    Kawakubo, Masahiro
    Kamaya, Masayuki
    Zairyo/Journal of the Society of Materials Science, Japan, 2012, 61 (07) : 635 - 641
  • [2] The effect of electrical hydrogen charging on the strength of 316 stainless steel
    Sugiyama, S
    Ohkubo, H
    Takenaka, M
    Ohsawa, K
    Ansari, MI
    Tsukuda, N
    Kuramoto, E
    JOURNAL OF NUCLEAR MATERIALS, 2000, 283 : 863 - 867
  • [3] EFFECT OF INTERNAL HYDROGEN ON FATIGUE CRACK INITIATION SITES IN 316L AUSTENITIC STAINLESS STEEL
    Kagay, B.
    Ronevich, J.
    San Marchi, C.
    PROCEEDINGS OF ASME 2021 PRESSURE VESSELS AND PIPING CONFERENCE (PVP2021), VOL 4, 2021,
  • [4] Effect of hydrogen on nanoindentation creep of type 316 stainless steel
    Gao, X
    Qiao, LJ
    Su, YJ
    Chu, WY
    ACTA METALLURGICA SINICA, 2005, 41 (04) : 342 - 346
  • [5] Effect of carburizing on fatigue behaviour in a type 316 austenitic stainless steel
    Tokaji, K.
    Akita, M.
    COMPUTER METHODS AND EXPERIMENTAL MEASUREMENTS FOR SURFACE EFFECTS AND CONTACT MECHANICS VIII, 2007, 55 : 53 - +
  • [6] Loading sequence effect on fatigue life of Type 316 stainless steel
    Kamaya, Masayuki
    Kawakubo, Masahiro
    INTERNATIONAL JOURNAL OF FATIGUE, 2015, 81 : 10 - 20
  • [7] Fatigue strength of 316L-type stainless steel in simulated body fluids
    Maruyama, Norio
    Mori, Daisuke
    Hiromoto, Sachiko
    Kanazawa, Kenji
    Nakamura, Morihiko
    CORROSION SCIENCE, 2011, 53 (06) : 2222 - 2227
  • [8] DUCTILITY AND FATIGUE STRENGTH LOSS OF A HYDROGEN -CHARGED 316L AUSTENITIC STAINLESS STEEL
    Baek, Un Bong
    Thanh Tuan Nguyen
    Nahm, Seung Hoon
    Ryu, Kwon Sang
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2019, VOL 6B, 2019,
  • [9] The Effect of Tailored Deformation on Fatigue Strength of Austenitic 316L Stainless Steel
    Zhang, Meng Xiao
    Pang, Jian Chao
    Li, Shou Xin
    Zhang, Zhen Jun
    Zhang, Zhe Feng
    ADVANCED ENGINEERING MATERIALS, 2018, 20 (11)
  • [10] EFFECT OF HYDROGEN ON LOW CYCLE FATIGUE CHATACTERISTICS OF 316L STAINLESS STEEL
    Baek, Un-Bong
    Nahm, Seung-Hoon
    Lee, Hae-Moo
    Baek, Seung-Wook
    PROCEEDINGS OF THE 7TH INTERNATIONAL CONFERENCE ON MECHANICS AND MATERIALS IN DESIGN (M2D2017), 2017, : 421 - 422
12345