Microstructure evolution and mechanical properties of (Ti0.93W0.07)C-xWC-20Ni cermets

被引：30

作者：

Kim, Jiwoong ^{[1
]}

Kang, Shinhoo ^{[1
]}

机构：

[1] Seoul Natl Univ, Dept Mat Sci & Engn, Seoul 151742, South Korea

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2011年 / 528卷 / 7-8期

关键词：

Solid-solution carbide; Cermets; Phase stability; Mechanical properties; FRACTURE-TOUGHNESS; PHASE; DISSOLUTION; HARDMETALS; CARBIDES; POWDERS; SIZE; TI(C; (TI;

D O I：

10.1016/j.msea.2010.12.038

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The microstructure and mechanical properties of (Ti0.93W0.07)C-xWC-20Ni cermets were investigated to determine the effect of WC addition on the Ti-based solid solution cermet, (Ti0.93W0.07)C-20Ni. (Ti0.93W0.07)C-20Ni exhibited a homogeneous microstructure with no core-rim structure; however, a core-rim structure was observed with the addition of WC. The carbide size decreased sharply with the addition of 15 wt.% WC. After composition, very small coreless carbide (VSCC) particles abruptly emerged in the microstructure. These particles might be formed by homogeneous nucleation during the final stage of sintering and cooling after the outer rim formation period. With increasing WC addition, the hardness remained constant, whereas the toughness decreased. Compared with Ti(CN)-based cermets with similar compositions, the hardness and toughness of (Ti0.93W0.07)C-xWC-20Ni cermets exhibited higher values. The refined microstructure of Ti-based solid solution cermets is considered to be responsible for the superior mechanical properties. (C) 2010 Elsevier B.V. All rights reserved.

引用

页码：3090 / 3095

页数：6

共 50 条

[1] Effect of nitrogen and secondary carbide on the microstructure and properties of (Ti0.93W0.07)C-Ni cermets
Rafiaei, Seyed Mandi
Kim, Jae-Hee
Kang, Shinhoo
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2014, 44 : 123 - 128
[2] Influence of Ni/Co binders and Mo2C on the microstructure evolution and mechanical properties of (Ti0.93W0.07)C-based cermets
Rafiaei, Seyed Mahdi
Bahrami, Abbas
Shokouhimehr, Mohammadreza
CERAMICS INTERNATIONAL, 2018, 44 (15) : 17655 - 17659
[3] Microstructure and mechanical properties of (Ti,W,Ta)C-xMo-Ni cermets
Chen, Xiao
Xiong, Weihao
Qu, Jun
Yang, Qingqing
Yao, Zhenhua
Huang, Yuzhu
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2012, 31 : 56 - 61
[4] Microstructure and mechanical properties of (Nb,W,Ti)(C,N)-Ni solid solution cermets with 6 to 20 wt% Ni
Huang, S. G.
Liu, C.
Liu, B. L.
Vleugels, J.
Huang, J. H.
Lauwers, B.
Qian, J.
Mohrbacher, H.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2022, 103
[5] Microstructure and mechanical properties of TiC-WC-(Ti,W)C-Ni cermets
Kwon, H.
Kang, S.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 520 (1-2): : 75 - 79
[6] Effect of Mo2C on the Microstructure and Mechanical Properties of (Ti, W)C–Ni Cermets
Chengliang Han
Changan Tian
Powder Metallurgy and Metal Ceramics, 2014, 53 : 57 - 63
[7] Effect of Mo2C on the Microstructure and Mechanical Properties of (Ti, W)C-Ni Cermets
Han, Chengliang
Tian, Changan
POWDER METALLURGY AND METAL CERAMICS, 2014, 53 (1-2) : 57 - 63
[8] Correlation between microstructure and mechanical properties of Ti(C, N)-xWC-Ni cermets prepared by mechanical activation and subsequent in situ carbothermal reduction
Xu, Xiangyu
Zheng, Yong
Zhang, Jiajie
Ke, Zheng
Wu, Hao
Xue, Chaogang
CERAMICS INTERNATIONAL, 2021, 47 (10) : 14482 - 14489
[9] Effect of nano-size powders on the microstructure of Ti(C,N)-xWC-Ni cermets
Jung, Jinkwan
Kang, Shinhoo
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2007, 90 (07) : 2178 - 2183
[10] Fabrication, microstructure evolution, and mechanical properties of Ti(C,N)-HfN-WC-Ni-Mo cermets
Liu, Jiabao
Song, Jinpeng
Gao, Jiaojiao
Meng, Weiqi
Hu, Shiheng
Wang, Yao
JOURNAL OF THE KOREAN CERAMIC SOCIETY, 2024, 61 (04) : 581 - 592

← 1 2 3 4 5 →