Multiplicity of steady states in an UOP FCC unit with high efficiency regenerator

被引：0
|
作者：
Fernandes, Joana L. [1 ]
Pinheiro, Carla I. C. [1 ]
Oliveira, Nuno [2 ]
Ramoa Ribeiro, F. [1 ]
机构：
[1] Inst Super Tecn, CEBQ, Dept Chem Engn, Av Rovisco Pais 1, P-1049001 Lisbon, Portugal
[2] Univ Coimbra, Dept Chem Engn, GEPSI PSE Group, P-303290 Coimbra, Portugal
来源：
16TH EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING AND 9TH INTERNATIONAL SYMPOSIUM ON PROCESS SYSTEMS ENGINEERING | 2006年 / 21卷
关键词：
Fluidized Catalytic Cracking; high efficiency regenerator; steady state multiplicity; nonlinear dynamics;
D O I：
暂无
中图分类号：
TP301 [理论、方法];
学科分类号：
081202 ;
摘要：
Static bifurcation in a FCC unit is a problem that arises whenever studying the control of a FCC unit. The origin of this behavior is usually due to the exothermicity of the catalyst regeneration reactions and to important phenomena of backmixing in the regenerator. For this reason the geometrical and operational design of the regenerator unit plays an important role in the overall performance and dynamic stability of FCCs. Prior work has focused on model and control problems of different operating FCC units. However, none of these studies have considered a FCC unit with high efficiency regenerator. This paper presents an analysis of the static biftircation behavior of an UOP FCC unit with high efficiency regenerator. The results show that the high efficiency regenerator presents static bifurcation exhibiting multiple steady states, depending on the operating conditions.
引用
收藏
页码：1575 / 1580
页数：6
相关论文
共 50 条
  • [1] Steady state multiplicity in an UOPFCC unit with high-efficiency regenerator
    Fernandes, Joana L.
    Pinheiro, Carla I. C.
    Oliveira, Nuno M. C.
    Neto, Ana I.
    Ribeiro, Fernando Ramoa
    CHEMICAL ENGINEERING SCIENCE, 2007, 62 (22) : 6308 - 6322
  • [2] Influence of different catalyst deactivation models in a validated simulator of an industrial UOP FCC unit with high-efficiency regenerator
    Fernandes, Joana L.
    Domingues, Luis H.
    Pinheiro, Carla I. C.
    Oliveira, Nuno M. C.
    Ribeiro, Fernando Ramoa
    FUEL, 2012, 97 : 97 - 108
  • [3] Steady state model optimization and analysis of regenerator in FCC unit
    Bai, Xiaoliang
    Chu, Jizheng
    Yang, Guansan
    PROCEEDINGS OF THE 36TH CHINESE CONTROL CONFERENCE (CCC 2017), 2017, : 10338 - 10343
  • [4] Multiplicity of steady states in FCC units:: effect of operating conditions
    Hernández-Barajas, JR
    Vázquez-Román, R
    Salazar-Sotelo, D
    FUEL, 2006, 85 (5-6) : 849 - 859
  • [5] FCC UNIT REACTOR REGENERATOR CONTROL
    GROSDIDIER, P
    MASON, A
    AITOLAHTI, A
    HEINONEN, P
    VANHAMAKI, V
    COMPUTERS & CHEMICAL ENGINEERING, 1993, 17 (02) : 165 - 179
  • [6] MULTIPLE STEADY-STATES IN FCC UNIT OPERATIONS
    EDWARDS, WM
    KIM, HN
    CHEMICAL ENGINEERING SCIENCE, 1988, 43 (08) : 1825 - 1830
  • [7] Troubleshooting of a commercial FCC unit regenerator system
    Pulupula, S
    Singh, H
    Chopra, SJ
    FLUIDIZATION IX, 1998, : 733 - 739
  • [8] COMMENTS ON MULTIPLE STEADY-STATES IN FCC UNIT OPERATIONS
    EDWARDS, WM
    KIM, HN
    CHEMICAL ENGINEERING SCIENCE, 1989, 44 (10) : 2417 - 2418
  • [9] Multiple steady states of fluid catalytic cracking unit with high-efficiency regenerator: effect of reaction temperature control strategy on heat feedback
    Wang, Rui
    Luo, Xionglin
    Xu, Feng
    Huagong Xuebao/CIESC Journal, 2014, 65 (09): : 3519 - 3526
  • [10] Model development and validation of an industrial UOP fluid catalytic cracking unit with a high-efriciency regenerator
    Fernandes, Joana L.
    Pinheiro, Carla I. C.
    Oliveira, Nuno M. C.
    Inverno, Jose
    Ribeiro, Fernando Ramoa
    INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2008, 47 (03) : 850 - 866
12345