Rotating bending fatigue response of laser processed porous NiTi alloy

被引：31
|
作者：
Bernard, Sheldon [1 ]
Balla, Vamsi Krishna [1 ]
Bose, Susmita [1 ]
Bandyopadhyay, Amit [1 ]
机构：
[1] Washington State Univ, Sch Mech & Mat Engn, WM Keck Biomed Mat Res Lab, Pullman, WA 99164 USA
来源：
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS | 2011年 / 31卷 / 04期
基金：
美国国家科学基金会;
关键词：
Laser processing; NiTi alloy; Porous; Rotating bending; Fatigue; Mechanical properties; SHAPE-MEMORY ALLOY; TI-NI; CRACK GROWTH; MICROSTRUCTURE; DEFORMATION; PROPAGATION; STRENGTH; STRESS; TUBE; LIFE;
D O I：
10.1016/j.msec.2010.12.007
中图分类号：
TB3 [工程材料学]; R318.08 [生物材料学];
学科分类号：
0805 ; 080501 ; 080502 ;
摘要：
Porous implants are known to promote cell adhesion and have low elastic modulus, a combination that can significantly increase the life of an implant. However, porosity can significantly reduce the fatigue life of porous implants. Very little work has been reported on the fatigue behavior of bulk porous metals, specifically on porous nitinol (NiTi) alloy. In this article, we report high-cycle rotating bending fatigue response of porous NiTi alloys fabricated using Laser Engineered Net Shaping (LENS (TM)). Samples were characterized in terms of monotonic mechanical properties and microstructural features. Rotating bending fatigue results showed that the presence of 10% porosity in NiTi alloys can decrease the actual fatigue failure stress, at 10(6) cycles, up to 54% and single reversal failure stress by similar to 30%. From fractographic analysis, it is clear that the effect of surface porosity dominates the rotating bending fatigue failure of porous NiTi samples. (C) 2010 Elsevier B.V. All rights reserved.
引用
收藏
页码：815 / 820
页数：6
相关论文
共 50 条
  • [1] Compression fatigue behavior of laser processed porous NiTi alloy
    Bernard, Sheldon
    Balla, Vamsi Krishna
    Bose, Susmita
    Bandyopadhyay, Amit
    JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 2012, 13 : 62 - 68
  • [2] Rotating-bending fatigue of a laser-welded superelastic NiTi alloy wire
    Yan, X. J.
    Yang, D. Z.
    Qi, M.
    MATERIALS CHARACTERIZATION, 2006, 57 (01) : 58 - 63
  • [3] Fatigue behaviour of a laser welded pseudoelastic NiTi alloy under bending stresses
    Zimmermann, H
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 1997, 28 (02) : 82 - 87
  • [4] Fatigue behaviour of a laser welded pseudoelastic NiTi alloy under bending stresses
    Materialwiss Werkstofftech, 2 (82):
  • [5] Microstructure and corrosion behavior of laser processed NiTi alloy
    Marattukalam, Jithin J.
    Singh, Amit Kumar
    Datta, Susmit
    Das, Mitun
    Balla, Vamsi Krishna
    Bontha, Srikanth
    Kalpathy, Sreeram K.
    MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 2015, 57 : 309 - 313
  • [6] Anisotropy of Rotating Bending Fatigue Properties of α+β Titanium Alloy
    Chen S.
    Huang S.
    Ma Y.
    Yang J.
    Wang Q.
    Liang Y.
    Lei J.
    Yang R.
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2024, 53 (02): : 435 - 448
  • [7] Comparison of Bending Fatigue of NiTi and CuAlMn Shape Memory Alloy Bars
    Huang, Haoyu
    Zhu, Yuan-Zhi
    Chang, Wen-Shao
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2020, 2020
  • [8] Anisotropy of Rotating Bending Fatigue Properties of α plus ß Titanium Alloy
    Chen Song
    Huang Sensen
    Ma Yingjjie
    Yang Jie
    Wang Qian
    Liang Yu
    Lei Jiafeng
    Yang Rui
    RARE METAL MATERIALS AND ENGINEERING, 2024, 53 (02) : 435 - 448
  • [9] Rotating-bending fatigue of TiNi shape memory alloy wire
    Nippon Kikai Gakkai Ronbunshu A Hen, 599 (1543-1548):
  • [10] Notch sensitivity of squeeze cast aluminum alloy in rotating bending fatigue
    Kawagoishi, Norio, 1600, (56):
12345