Experimental and numerical investigations of the energy efficiency of conventional air conditioning systems in cooling mode and comfort assurance in office buildings

This paper provides a comparative study of the energy efficiency of a conventional ventilating and air conditioning (VAC) system with three configurations. This system was used to cool an experimental room in an office building in more control scenarios realised by adopting different cooled water temperatures and chiller cooling systems. In this purpose, an air-water mist cooled system for an air-cooled chiller is proposed. Depending on the components, the analysed VAC system has the following configurations: (1) air handling unit (AHU) and fan-coil units (FCUs); (2) air handling unit (AHU); and (3) heat recovery unit (HRU) and fan-coil units (FCUs). The electricity consumption weight of the equipment of each VAC system, the total energy consumption and the influence of control parameters on this consumption are analysed. The results of the experiments indicate that the optimal efficiency VAC system in office buildings includes an AHU and FCUs with an air-water mist cooled chiller and a cooled water temperature of 8 degrees C. For this system, a mathematical model is developed to minimise the electricity consumption by optimal control, where the consumption depends only on non-controlled parameters (solar radiation intensity and outdoor air temperature). This model is verified with actual measurements to confirm its accuracy, and a good agreement between the prediction and measurement is achieved. Additionally, the assessment of thermal comfort in the experimental office is performed based on the PMV-PPD model using the ASHRAE Thermal Comfort programme. The obtained results demonstrate that the AHU&FCUs system assures an increase in thermal comfort. Finally, a TRNSYS simulation model of energy consumption and PMV-PPD indices for the AHU&FCUs system is developed and experimentally validated. (C) 2014 Elsevier B.V. All rights reserved.