Poly(ionic liquid)-zinc polyoxometalate composite as a binder-free cathode for high-performance lithium-sulfur batteries

The development of the most promising next-generation Li-S batteries with high utilization of sulfur while retaining high capacity is one of the great challenges of the 21st century. Here, we reported sandwich polyoxometalate [WZn3(H2O)(2)(ZnW9O34)(2)](12-) (ZnPOM) over a poly(1-vinyl-3(2-(2-methoxyethoxy)ethyl)imidazolium) cation (PVIMo) matrix as a binder-free cathode catalyst for a high-capacity LiS battery with a high areal loading of 7.68 mg cm(-2) and high areal capacity of 11.14 mA h cm(-2) (70% sulfur). The synergistic effect between PVIMo and ZnPOM resulted in outstanding initial discharge capacity of 1450 mA h g(-1) at 0.5 C with high capacity retention (97%), high coulombic efficiency (> 98%) and a negligible capacity fading rate of 0.02% per cycle at an electrolyte/sulfur ratio of 10 mu L(E) mg((S))(-1) and capacity fading of only 0.02% per cycle. The cationic polymer PVIMo held the negatively charged polysulfide ions at the cathode and ZnPOM facilitated the conversion of polysulfides to sulfur. Quantitative estimation by EQCM, UV-Vis analysis and potentiometric titration demonstrated negligible loss of sulfur even after 120 cycles of the charge-discharge process.